LugerForum Discussion Forums my profile | register | faq | search
upload photo | donate | calendar

Go Back   LugerForum Discussion Forums > Luger Discussion Forums > All P-08 Military Lugers

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Unread 11-17-2002, 08:01 PM   #1
thater
User
 
Join Date: Oct 2002
Posts: 13
Thanks: 0
Thanked 0 Times in 0 Posts
Post bad feeding problems

My 1937 S/42 often jams up. It doesn't properly feed cartridges when the clip gets low. Its an old military clip that I am using. The cartriges will often miss the reciever and end up sitting vertically, jamming the action. Also, after a clip is emptied, when shoving a loaded clip in, shouldnt the action slam back into place, chambering a new cartridge? My luger wont do this. I have to pull the open action back just a bit and let it go. My buddy has a missmatched luger that, appearantly doesnt semiauto fire. He claims that he has to lift the action halfway up after shooting one round and then push it back down. Otherwise, it wont fire when pulling the trigger. The pin on the sear bar operates properly. The trigger spring is good. I took it apart many times, but cant find a problem. His feeds like crap too. But it does load a round automatically, when jamming a loaded clip in. Any suggestions very welcome. Thanks. Ben Thate
thater is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:52 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Lugerforum.com