Mauser Wrench

Maestro · 12-11-2013, 02:06 AM

are these related to Lugers at all?

alvin · 12-11-2013, 04:27 AM

Looks like generic tool.

Vlim · 12-11-2013, 06:40 AM

Nope.

Mauser has had a subsidiary that produced (and still produces) tools and measuring equipment.

http://www.krause-mauser.com/portal/

Sergio Natali · 12-11-2013, 07:14 AM

No, I'm almost sure that those tools belonged to Mauser subsidiary productions.

sheepherder · 12-11-2013, 10:11 AM

I'm pretty sure that is one of the tools that Bubba uses to 'sporterize' his Mauser rifles...

kzullick · 12-11-2013, 06:23 PM

Pitting, rust, very little bluing, a shooter at best.

John Sabato · 12-11-2013, 06:42 PM

First use of the spiral toggle action?

...just kidding for you Newbies...

sheepherder · 12-11-2013, 07:26 PM

Quote:

Originally Posted by John Sabato

First use of the spiral toggle action?

...just kidding for you Newbies...

I could be mistaken, but it looks as if the finger adjuster [the spiral] has a quick-disconnect lever...To run the jaws open without using the spiral...I don't think any Yankee Crescent-style wrench has this...has anyone else seen anything like this???

John Sabato · 12-12-2013, 10:05 AM

Quote:

Originally Posted by sheepherder

I could be mistaken, but it looks as if the finger adjuster [the spiral] has a quick-disconnect lever...To run the jaws open without using the spiral...I don't think any Yankee Crescent-style wrench has this...has anyone else seen anything like this???

I think that lever may lock the spiral so the adjustment size of the wrench jaw doesn't move... also an excellent idea... and no, i have not ever seen a wrench like that before, but I have seen other Mauser tools.

Olle · 12-13-2013, 09:32 PM

Quote:

Originally Posted by sheepherder

I could be mistaken, but it looks as if the finger adjuster [the spiral] has a quick-disconnect lever...To run the jaws open without using the spiral...I don't think any Yankee Crescent-style wrench has this...has anyone else seen anything like this???

I believe you're right... seems like the screw assembly will pivot around the pin showing on the side, possibly spring loaded as well.

wlyon · 12-11-2013, 08:24 PM

No but it looks like an excellent idea. Bill

CAP Black · 12-11-2013, 10:23 PM

None of that talk makes them gun related. IMHO
Jack

sheepherder · 12-12-2013, 10:36 AM

At first glance, it looks like a Crescent wrench...but totally different...

It's like someone looked at a Vernier and said "Wow...That would be a good design for an adjustable wrench!"...

(If you think members of this forum are anal-retentive, you should meet an old German machinist...Back in 1969 I worked as a production machinist in an aerospace manufacturer...The machinist next to me was an old Americanized-German; ate a raw onion a day...One day I couldn't find a scrap to stir my coffee, so I pulled the 6" Starrett scale out of my pocket and stirred my coffee with that...You could hear him scream all over the plant...people came running...He was livid that I would so misuse my tools...After that, all us punk kids stirred our coffee with our scales...)

12-11-2013, 07:14 AM	#4
Sergio Natali User Join Date: Feb 2013 Location: Somewhere in Northern Italy Posts: 2,646 Thanks: 1,087 Thanked 1,783 Times in 1,007 Posts	No, I'm almost sure that those tools belonged to Mauser subsidiary productions. __________________ "Originality can't be restored and should be at the top of any collector's priority list.

12-11-2013, 10:11 AM	#5
sheepherder Lifer Lifetime Forum Patron Join Date: Feb 2009 Location: ...on the 'ol Erie Canal... Posts: 8,208 Thanks: 1,425 Thanked 4,474 Times in 2,343 Posts	I'm pretty sure that is one of the tools that Bubba uses to 'sporterize' his Mauser rifles... __________________ I like my coffee the way I like my women... ...Cold and bitter...

12-11-2013, 06:42 PM	#7
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,156 Thanks: 3,003 Thanked 2,309 Times in 1,098 Posts	First use of the spiral toggle action? ...just kidding for you Newbies... __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

12-11-2013, 08:24 PM	#11
wlyon Lifer 2X Lifetime Forum Patron Join Date: May 2005 Location: Somewhere in Montana Posts: 2,673 Thanks: 3,244 Thanked 2,661 Times in 988 Posts	No but it looks like an excellent idea. Bill __________________ Bill Lyon

12-12-2013, 10:36 AM	#13
sheepherder Lifer Lifetime Forum Patron Join Date: Feb 2009 Location: ...on the 'ol Erie Canal... Posts: 8,208 Thanks: 1,425 Thanked 4,474 Times in 2,343 Posts	At first glance, it looks like a Crescent wrench...but totally different... It's like someone looked at a Vernier and said "Wow...That would be a good design for an adjustable wrench!"... (If you think members of this forum are anal-retentive, you should meet an old German machinist...Back in 1969 I worked as a production machinist in an aerospace manufacturer...The machinist next to me was an old Americanized-German; ate a raw onion a day...One day I couldn't find a scrap to stir my coffee, so I pulled the 6" Starrett scale out of my pocket and stirred my coffee with that...You could hear him scream all over the plant...people came running...He was livid that I would so misuse my tools...After that, all us punk kids stirred our coffee with our scales...) __________________ I like my coffee the way I like my women... ...Cold and bitter...

12-11-2013, 04:27 AM	#2
alvin User Join Date: Jul 2007 Location: US Posts: 3,843 Thanks: 132 Thanked 729 Times in 438 Posts	Looks like generic tool.

12-11-2013, 06:40 AM	#3
Vlim Moderator Lifetime LugerForum Patron Join Date: Oct 2002 Location: Europe Posts: 5,053 Thanks: 1,036 Thanked 3,991 Times in 1,205 Posts	Nope. Mauser has had a subsidiary that produced (and still produces) tools and measuring equipment. http://www.krause-mauser.com/portal/

12-11-2013, 06:23 PM	#6
kzullick Lifer Lifetime Forum Patron Join Date: Aug 2012 Location: East Berwick, Pennsylvania Posts: 253 Thanks: 731 Thanked 113 Times in 87 Posts	Pitting, rust, very little bluing, a shooter at best.

12-11-2013, 10:23 PM	#12
CAP Black User Join Date: Dec 2008 Location: Fairmont, WV Right here in Mountaineer country and God's country Posts: 767 Thanks: 100 Thanked 174 Times in 96 Posts	None of that talk makes them gun related. IMHO Jack