barrel replacement services update...

G.T. · 12-01-2013, 09:51 PM

Hello to all, well, it's been a tough learning curve... but my barrel replacement efforts are reaching a zenith... meaning, I'm fairly confident I can handle most tasks at hand with the equipment I now have... I will continue to add to my tooling and fixtures, and also my skill sets if I can just remember what the hell I did to achieve success!! ...

.... But, that being said, I have found a fly in the ointment so to speak... and that is, receivers with bent forks or deformed and twisted forks to contend with as well.... Good news is, I can straighten them ... bad news is, not for free... So, if you want to send me your projects, I will happily (and gratefully!) take the on with my best effort!!!! If the forks need attention, I will let you know right at the git'go.... no surprises... Best to all, til...lat'r....GT

Lugerdoc · 12-04-2013, 11:45 AM

Gt, Great job on mine. I also appreciate that you had a more appropriate barrel than the one that I sent. Tom

ithacaartist · 12-04-2013, 02:30 PM

Mine too! It might not have been the first, but I'm sure its number in the progression of G.T. barrel installs is low. If my project provided traction on the learning curve, then very glad to contribute!

D.P.

sheepherder · 12-04-2013, 02:47 PM

Gerry, do you do bluing on customer supplied barrels??? I have a Luger artillery barrel w/receiver needing bluing, plus a C96 Mauser barrel that also needs bluing.

G.T. · 12-04-2013, 11:53 PM

Hi Rich, sorry, but I haven't any resources of my own to blue...When they have time and room, I have Policeluger, Thor, or Charles Danner do my work for me... and they are all excellent to outstanding in my experience...Thanks also Tom and David... I learned a lot on both of your projects... gained a lot of confidence during the repairs... As mentioned above, my tooling and fixtures are vastly improved compared to when I first started...

.. Best to all, til...lat'....GT...

kwolfe3972 · 12-14-2013, 07:08 PM

Hello Gerald, I have some questions about your rebarreling I couldn't find an email could you email me
kwolfe3972@aol.com
keith

G.T. · 12-14-2013, 07:49 PM

Hi Keith, I sent you an email, but if that fails, send me a private message on the forum... best to you, til...lat'r....GT

G.T. · 12-15-2013, 04:46 PM

Hi to all! More good news! I've recently added a few 4" barrels to my inventory... new "made in Germany" 9mm barrels, and some nice 1920 .30 cal. barrels... and, a few used take off 9mm's..prices vary deal to deal, as I like to barter.. .. but, we now have a few options.... Best to all, til...lat'r...GT

Sieger · 12-16-2013, 01:31 AM

Quote:

Originally Posted by G.T.

Hi to all! More good news! I've recently added a few 4" barrels to my inventory... new "made in Germany" 9mm barrels, and some nice 1920 .30 cal. barrels... and, a few used take off 9mm's..prices vary deal to deal, as I like to barter.. .. but, we now have a few options.... Best to all, til...lat'r...GT

GT,

Have you discovered the Lothar Walther Luger barrels on their website? They have just about all of them. They are pricy, but excellent.

Sieger

G.T. · 12-17-2013, 08:37 PM

Hi Sieger, I'd love a barrel like that!!...but, as of yet...no one has asked for, or inquired about a barrel of that quality.... Really neat stuff though... And, it requires further work, as in chambering... still, top notch stuff.... Best to you, til...lat'r...GT

gizmo · 12-18-2013, 02:00 PM

Your website link, please?

G.T. · 12-18-2013, 04:47 PM

Their site is not real clear on where and how.. they just list them in the white not chambered... but it looks as if they also offer high quality blanks as well??...I'm sure they can do anything that would be desired.. but I'll also bet it costs a tidy sum for any or all... Just look up Lothar Walther Luger barrels on Google.... best to all, til...lat'r.....GT

12-01-2013, 09:51 PM	#1
G.T. Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: Chandler Arizona Posts: 3,523 Thanks: 1,321 Thanked 3,707 Times in 1,012 Posts	barrel replacement services update... Hello to all, well, it's been a tough learning curve... but my barrel replacement efforts are reaching a zenith... meaning, I'm fairly confident I can handle most tasks at hand with the equipment I now have... I will continue to add to my tooling and fixtures, and also my skill sets if I can just remember what the hell I did to achieve success!! ....... But, that being said, I have found a fly in the ointment so to speak... and that is, receivers with bent forks or deformed and twisted forks to contend with as well.... Good news is, I can straighten them ... bad news is, not for free... So, if you want to send me your projects, I will happily (and gratefully!) take the on with my best effort!!!! If the forks need attention, I will let you know right at the git'go.... no surprises... Best to all, til...lat'r....GT

12-04-2013, 11:45 AM	#2
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 737 Times in 484 Posts	Gt, Great job on mine. I also appreciate that you had a more appropriate barrel than the one that I sent. Tom __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net

12-04-2013, 02:30 PM	#3
ithacaartist Twice a Lifer Lifetime Forum Patron Join Date: Mar 2011 Location: Atop the highest hill in Schuyler County NY Posts: 3,369 Thanks: 7,432 Thanked 2,611 Times in 1,378 Posts	Mine too! It might not have been the first, but I'm sure its number in the progression of G.T. barrel installs is low. If my project provided traction on the learning curve, then very glad to contribute! D.P. __________________ "... Liberty is the seed and soil, the air and light, the dew and rain of progress, love and joy."-- Robert Greene Ingersoll 1894

12-04-2013, 02:47 PM	#4
sheepherder Lifer Lifetime Forum Patron Join Date: Feb 2009 Location: ...on the 'ol Erie Canal... Posts: 8,195 Thanks: 1,413 Thanked 4,462 Times in 2,336 Posts	Gerry, do you do bluing on customer supplied barrels??? I have a Luger artillery barrel w/receiver needing bluing, plus a C96 Mauser barrel that also needs bluing. __________________ I like my coffee the way I like my women... ...Cold and bitter...

12-04-2013, 11:53 PM	#5
G.T. Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: Chandler Arizona Posts: 3,523 Thanks: 1,321 Thanked 3,707 Times in 1,012 Posts	barrel replacement! Hi Rich, sorry, but I haven't any resources of my own to blue...When they have time and room, I have Policeluger, Thor, or Charles Danner do my work for me... and they are all excellent to outstanding in my experience...Thanks also Tom and David... I learned a lot on both of your projects... gained a lot of confidence during the repairs... As mentioned above, my tooling and fixtures are vastly improved compared to when I first started... .. Best to all, til...lat'....GT...

12-14-2013, 07:08 PM	#6
kwolfe3972 New User Join Date: Nov 2013 Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts	Hello Gerald, I have some questions about your rebarreling I couldn't find an email could you email me kwolfe3972@aol.com keith

12-14-2013, 07:49 PM	#7
G.T. Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: Chandler Arizona Posts: 3,523 Thanks: 1,321 Thanked 3,707 Times in 1,012 Posts	email sent Hi Keith, I sent you an email, but if that fails, send me a private message on the forum... best to you, til...lat'r....GT

12-15-2013, 04:46 PM	#8
G.T. Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: Chandler Arizona Posts: 3,523 Thanks: 1,321 Thanked 3,707 Times in 1,012 Posts	re-barreling service Hi to all! More good news! I've recently added a few 4" barrels to my inventory... new "made in Germany" 9mm barrels, and some nice 1920 .30 cal. barrels... and, a few used take off 9mm's..prices vary deal to deal, as I like to barter.. .. but, we now have a few options.... Best to all, til...lat'r...GT

12-17-2013, 08:37 PM	#10
G.T. Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: Chandler Arizona Posts: 3,523 Thanks: 1,321 Thanked 3,707 Times in 1,012 Posts	walther bbl's Hi Sieger, I'd love a barrel like that!!...but, as of yet...no one has asked for, or inquired about a barrel of that quality.... Really neat stuff though... And, it requires further work, as in chambering... still, top notch stuff.... Best to you, til...lat'r...GT

12-18-2013, 02:00 PM	#11
gizmo User Join Date: Dec 2004 Location: Western Pennsylvania Posts: 27 Thanks: 6 Thanked 4 Times in 3 Posts	Your website link, please?

12-18-2013, 04:47 PM	#12
G.T. Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: Chandler Arizona Posts: 3,523 Thanks: 1,321 Thanked 3,707 Times in 1,012 Posts	don't know much about them.. Their site is not real clear on where and how.. they just list them in the white not chambered... but it looks as if they also offer high quality blanks as well??...I'm sure they can do anything that would be desired.. but I'll also bet it costs a tidy sum for any or all... Just look up Lothar Walther Luger barrels on Google.... best to all, til...lat'r.....GT