Mec-Gar Magazines

Joe KY · 02-27-2002, 02:24 PM

Well, packed up my new Mitchell Arms AE shooter and headed to Ft. Knox for a day of shooting. I had several problems with the magazine feeding 115gr FMJ factory loads. I belive my problem is in the magazine. I was wondering if anyone could point me in the right direction to purchase a Mec-Gar magazine? From some of the past posts this seems like the favorite for aftermarket magazines. Any help would be great.

Thanks, Joe KY

02-27-2002, 02:34 PM

Look under the classifieds, there is a gentleman that had Mec Gar mags and as of December, he still had some.

Ed

Hugh · 02-27-2002, 02:45 PM

Contact Doug George at deg16@home.com. He has them at discounted prices.

02-27-2002, 02:57 PM

This maybe a stupid question, but I'm new so that's my excuse.

Where is the classified section?

02-27-2002, 03:15 PM

On your left is a link that goes to the Classifieds section.

I have observed that if my settings on one PC, may limit what I can see. Such as, if my settings are at 800 x 600, then you don't see everything on the left.

In Explorer go to view, text and make the letters smaller, and you might open up several areas of the forum you have never known were there!

Classifieds is just below links and resources.

Ed

Joe KY · 02-27-2002, 03:25 PM

Thanks fellas, I think I'll try Doug and see what he has available.

Joe KY

02-27-2002, 03:40 PM

While I appreciate the reply, I can assure you that the link saying 'classifieds' is not there. If you seperate out the menu frames, like so: http://www.lugerforum.com/lugermenu.html and http://www.lugerforum.com/lugermenu2.html

You will not see classifieds anywhere on it (or if you do, maybe there is some other problem) I'm running at 1024 x 768 so I'm not missing it. It does not appear in Netscape 4.79 nor IE 6.0.

Hugh · 02-27-2002, 03:50 PM

Swamp-Gas,

I can not see it on my computer unless I set the "view" text size to "smallest", then it appears under "Links & Resources".

Luke · 02-27-2002, 04:17 PM

Doug did have a good supply in the past; I bought several which worked flawlessly in several different Lugers.

Also, I have picked up a few at local gun shows, but Doug's prices are better.

John Sabato · 02-27-2002, 04:24 PM

takes you to a page where you can reach the classifieds if your graphics settings don't let you see the whole left frame menu bar...

-John

02-27-2002, 04:25 PM

Here is what it looks like in IE 6.0 with text size set to smallest.

http://www.cableone.net/drhedgehog/nothere.jpg

John D. · 02-27-2002, 04:45 PM

By chance - do you have an "AD BLOCKER" program? If you do - some will read the link source and block your screen from showing the link. Since the direct link is "http://www.lugerforum.com/ads/index.htm" (and notice the called directory is "ADS") it sounds like you ad blocker software is working great - but it is also block ads you DO want to see

Try turning it off - and let us know, OK?

02-27-2002, 04:54 PM

Thanks John D. that was it. I use http://www.adsubtract.com and it works great. A little too well I guess. Thanks!

John D. · 02-27-2002, 04:58 PM

02-27-2002, 05:00 PM

Tom heller under heller arms has them also. He is listed under Luger Menu Links at the left.

Hugh · 02-27-2002, 05:02 PM

I found your problem! It's that little APPLE down at the bottom!

02-27-2002, 02:24 PM	#1
Joe KY User Join Date: Jun 2002 Location: Near the US Bullion Depository Posts: 20 Thanks: 0 Thanked 0 Times in 0 Posts	Mec-Gar Magazines Well, packed up my new Mitchell Arms AE shooter and headed to Ft. Knox for a day of shooting. I had several problems with the magazine feeding 115gr FMJ factory loads. I belive my problem is in the magazine. I was wondering if anyone could point me in the right direction to purchase a Mec-Gar magazine? From some of the past posts this seems like the favorite for aftermarket magazines. Any help would be great. Thanks, Joe KY

02-27-2002, 02:34 PM	#2
66mustang Guest Posts: n/a	Re: Mec-Gar Magazines Look under the classifieds, there is a gentleman that had Mec Gar mags and as of December, he still had some. Ed

02-27-2002, 02:45 PM	#3
Hugh RIP Join Date: Jun 2002 Location: Southeast Texas Swamp Posts: 2,460 Thanks: 2 Thanked 166 Times in 65 Posts	Re: Mec-Gar Magazines Contact Doug George at deg16@home.com. He has them at discounted prices.

02-27-2002, 02:57 PM	#4
Swamp_Gas Guest Posts: n/a	Re: Mec-Gar Magazines This maybe a stupid question, but I'm new so that's my excuse. Where is the classified section?

02-27-2002, 03:15 PM	#5
66mustang Guest Posts: n/a	Re: Mec-Gar Magazines On your left is a link that goes to the Classifieds section. I have observed that if my settings on one PC, may limit what I can see. Such as, if my settings are at 800 x 600, then you don't see everything on the left. In Explorer go to view, text and make the letters smaller, and you might open up several areas of the forum you have never known were there! Classifieds is just below links and resources. Ed

02-27-2002, 03:25 PM	#6
Joe KY User Join Date: Jun 2002 Location: Near the US Bullion Depository Posts: 20 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Mec-Gar Magazines Thanks fellas, I think I'll try Doug and see what he has available. Joe KY

02-27-2002, 03:40 PM	#7
Swamp_Gas Guest Posts: n/a	Missing Classifieds Link While I appreciate the reply, I can assure you that the link saying 'classifieds' is not there. If you seperate out the menu frames, like so: http://www.lugerforum.com/lugermenu.html and http://www.lugerforum.com/lugermenu2.html You will not see classifieds anywhere on it (or if you do, maybe there is some other problem) I'm running at 1024 x 768 so I'm not missing it. It does not appear in Netscape 4.79 nor IE 6.0.

02-27-2002, 03:50 PM	#8
Hugh RIP Join Date: Jun 2002 Location: Southeast Texas Swamp Posts: 2,460 Thanks: 2 Thanked 166 Times in 65 Posts	Re: Missing Classifieds Link Swamp-Gas, I can not see it on my computer unless I set the "view" text size to "smallest", then it appears under "Links & Resources".

02-27-2002, 04:17 PM	#9
Luke User Join Date: Jun 2002 Location: NC - USA Posts: 1,239 Thanks: 0 Thanked 19 Times in 7 Posts	Re: Mec-Gar Magazines Doug did have a good supply in the past; I bought several which worked flawlessly in several different Lugers. Also, I have picked up a few at local gun shows, but Doug's prices are better.

02-27-2002, 04:24 PM	#10
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,156 Thanks: 3,003 Thanked 2,309 Times in 1,098 Posts	"Luger Menu Links" at the bottom of the left frame takes you to a page where you can reach the classifieds if your graphics settings don't let you see the whole left frame menu bar... -John

02-27-2002, 04:25 PM	#11
Swamp_Gas Guest Posts: n/a	Re: Missing Classifieds Link Here is what it looks like in IE 6.0 with text size set to smallest. http://www.cableone.net/drhedgehog/nothere.jpg

02-27-2002, 04:29 PM	#12
Swamp_Gas Guest Posts: n/a	Re: "Luger Menu Links" at the bottom of the left frame The problem is in the html. http://www.cableone.net/drhedgehog/nothere2.jpg

02-27-2002, 04:45 PM	#13
John D. Administrator & Site Owner LugerForum Patron Join Date: Jun 2002 Location: A Little NE of Somewhere... Posts: 2,651 Thanks: 478 Thanked 517 Times in 129 Posts	Maybe I can help.... By chance - do you have an "AD BLOCKER" program? If you do - some will read the link source and block your screen from showing the link. Since the direct link is "http://www.lugerforum.com/ads/index.htm" (and notice the called directory is "ADS") it sounds like you ad blocker software is working great - but it is also block ads you DO want to see Try turning it off - and let us know, OK?

02-27-2002, 04:54 PM	#14
Swamp_Gas Guest Posts: n/a	Re: Maybe I can help.... Thanks John D. that was it. I use http://www.adsubtract.com and it works great. A little too well I guess. Thanks!

02-27-2002, 04:58 PM	#15
John D. Administrator & Site Owner LugerForum Patron Join Date: Jun 2002 Location: A Little NE of Somewhere... Posts: 2,651 Thanks: 478 Thanked 517 Times in 129 Posts	My Pleasure!!! Enjoy the ads you CAN SEE now!!!

02-27-2002, 05:00 PM	#16
larry cook Guest Posts: n/a	Re: Maybe I can help.... Tom heller under heller arms has them also. He is listed under Luger Menu Links at the left.

02-27-2002, 05:02 PM	#17
Hugh RIP Join Date: Jun 2002 Location: Southeast Texas Swamp Posts: 2,460 Thanks: 2 Thanked 166 Times in 65 Posts	Re: Missing Classifieds Link I found your problem! It's that little APPLE down at the bottom!