Need tracing of a Artillery stock

RBorecky · 07-21-2007, 10:21 AM

Anyone able to trace there Artillery stock so I can have fun making one. It is also possible if I get a length and width that I can do it from those measurements since it is not to fake but to make a full figured { nice grained} stock. Thanks,,Rick B

John Sabato · 07-23-2007, 10:41 AM

Thanks Rick...

IT is true that I have drawn the 2 dimensional profile view of the Artillery Luger stock to include the locations of the holes for both the straps and attachments... and the drawing is accurate to the original blueprints... you can take this drawing and print it out life size using any number of free AutoCAD viewing programs... then you can apply the paper to the wood of your choice and cut the profile out with a good jig saw.... the challenge would be the unusual wood swell around the end that holds the attachment iron. Not easy as an afternoon project, but certainly within the skillset of an amateur woodworker.

If you are an advanced woodworker or know someone who uses a CNC automated router, you can have a stock blank even faster since the geometry I have drawn can be quickly transferred to whatever software they use...

Instructions for ordering the CD are in the FOR SALE forum as a "sticky" post at the top.

This drawing is included as a bonus on the Luger blueprint CD

RBorecky · 07-23-2007, 09:56 PM

Thank you and I just sent PM'd you for info where to send money. Thanks everyone. Rick

John Sabato · 07-24-2007, 01:48 PM

Rick, Check your PM's... and I also suggest that you search the forum regarding the legality of shoulderstocks and their use with Lugers... if you have any specific questions, don't hesitate to ask.

07-21-2007, 10:21 AM	#1
RBorecky User Join Date: Jul 2007 Location: Cleveland,Ohio Posts: 115 Thanks: 0 Thanked 0 Times in 0 Posts	Need tracing of a Artillery stock Anyone able to trace there Artillery stock so I can have fun making one. It is also possible if I get a length and width that I can do it from those measurements since it is not to fake but to make a full figured { nice grained} stock. Thanks,,Rick B

07-23-2007, 10:41 AM	#2
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,156 Thanks: 3,003 Thanked 2,308 Times in 1,098 Posts	Thanks Rick... IT is true that I have drawn the 2 dimensional profile view of the Artillery Luger stock to include the locations of the holes for both the straps and attachments... and the drawing is accurate to the original blueprints... you can take this drawing and print it out life size using any number of free AutoCAD viewing programs... then you can apply the paper to the wood of your choice and cut the profile out with a good jig saw.... the challenge would be the unusual wood swell around the end that holds the attachment iron. Not easy as an afternoon project, but certainly within the skillset of an amateur woodworker. If you are an advanced woodworker or know someone who uses a CNC automated router, you can have a stock blank even faster since the geometry I have drawn can be quickly transferred to whatever software they use... Instructions for ordering the CD are in the FOR SALE forum as a "sticky" post at the top. This drawing is included as a bonus on the Luger blueprint CD __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

07-24-2007, 01:48 PM	#4
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,156 Thanks: 3,003 Thanked 2,308 Times in 1,098 Posts	Rick, Check your PM's... and I also suggest that you search the forum regarding the legality of shoulderstocks and their use with Lugers... if you have any specific questions, don't hesitate to ask. __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

07-23-2007, 09:56 PM	#3
RBorecky User Join Date: Jul 2007 Location: Cleveland,Ohio Posts: 115 Thanks: 0 Thanked 0 Times in 0 Posts	Thank you and I just sent PM'd you for info where to send money. Thanks everyone. Rick