Very Rare Luger barrel. NOT!!!

Ron Smith · 06-06-2005, 08:55 AM

http://cgi.ebay.com/ws/eBayISAPI.dll...161185176&rd=1

Here you go. It's not just a Kriegsmarine, but a Krieghoff Kriegsmarine barrel with a "very rare" thin barrel flange. Or as we call them in gun repair... a relief-cut. This barrel is now junk. They are trying to pass it off as a rare variation.

For those of you who are not knowledgable about this. If you are trying to remove a stubborn barrel. And you don't want to save it. You use a lathe or hacksaw and cut a relief cut around the full circumference of the barrel flange to relieve the tension on the barrel threads. So that you can unscrew it. This is a well done example. Which is now a damn fine paperweight.

Ron

06-06-2005, 08:55 AM	#1
Ron Smith User Join Date: Feb 2004 Location: Orygun Posts: 4,243 Thanks: 118 Thanked 245 Times in 150 Posts	Very Rare Luger barrel. NOT!!! http://cgi.ebay.com/ws/eBayISAPI.dll...161185176&rd=1 Here you go. It's not just a Kriegsmarine, but a Krieghoff Kriegsmarine barrel with a "very rare" thin barrel flange. Or as we call them in gun repair... a relief-cut. This barrel is now junk. They are trying to pass it off as a rare variation. For those of you who are not knowledgable about this. If you are trying to remove a stubborn barrel. And you don't want to save it. You use a lathe or hacksaw and cut a relief cut around the full circumference of the barrel flange to relieve the tension on the barrel threads. So that you can unscrew it. This is a well done example. Which is now a damn fine paperweight. Ron __________________ I Still Need DWM side plate #49... if anyone runs across a nice one. What ~Rudyard Kipling~ said...