rebarelling 30 luger to 9mm

macs guns · 04-19-2005, 12:13 AM

I have a 1906 AE luger which is not exactly collector material but it is a good shooter, however 30 luger is not economical nor is it easy to find. can i buy a slide already barelled with a 9mm or do i have to buy a 9mm barell and install that my gun. it would be nice if i can keep original parts intact but...... any input appreciated,
thanks, mac

Dwight Gruber · 04-19-2005, 12:52 AM

If you want to keep the original parts just bore and chamber it.

--Dwight

Hugh · 04-19-2005, 10:23 AM

Mac,

Buy a barreled receiver and interchange them, most of the time they will fit and function ok. I have run into a few that were too tight, but if you get a DWM or Erfurt and not a Mauser receiver to match the DWM frame you should be ok.

Lugerdoc · 04-19-2005, 11:03 AM

Mac, Even if your M1906 is one of the early long frames, a standard PO8 9mm barrelled receiver should work. You may want to also change the recoil spring over to 9mm, if you plan to shoot it a lot, to avoid any damage. TH

macs guns · 05-03-2005, 10:24 PM

thanks for all your input, it was trully helpful and now i begin a new mission! hopefully ebay has what i need
mac

04-19-2005, 12:13 AM	#1
macs guns User Join Date: Apr 2005 Location: jeff county missouri Posts: 13 Thanks: 0 Thanked 0 Times in 0 Posts	rebarelling 30 luger to 9mm I have a 1906 AE luger which is not exactly collector material but it is a good shooter, however 30 luger is not economical nor is it easy to find. can i buy a slide already barelled with a 9mm or do i have to buy a 9mm barell and install that my gun. it would be nice if i can keep original parts intact but...... any input appreciated, thanks, mac

04-19-2005, 10:23 AM	#3
Hugh RIP Join Date: Jun 2002 Location: Southeast Texas Swamp Posts: 2,460 Thanks: 2 Thanked 166 Times in 65 Posts	Mac, Buy a barreled receiver and interchange them, most of the time they will fit and function ok. I have run into a few that were too tight, but if you get a DWM or Erfurt and not a Mauser receiver to match the DWM frame you should be ok. __________________ *TRUMP FOR PREZ IN '20!*

04-19-2005, 11:03 AM	#4
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 737 Times in 484 Posts	Mac, Even if your M1906 is one of the early long frames, a standard PO8 9mm barrelled receiver should work. You may want to also change the recoil spring over to 9mm, if you plan to shoot it a lot, to avoid any damage. TH __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net

04-19-2005, 12:52 AM	#2
Dwight Gruber User Join Date: Jun 2002 Location: Portland, Oregon Posts: 3,908 Thanks: 0 Thanked 1,330 Times in 435 Posts	If you want to keep the original parts just bore and chamber it. --Dwight

05-03-2005, 10:24 PM	#5
macs guns User Join Date: Apr 2005 Location: jeff county missouri Posts: 13 Thanks: 0 Thanked 0 Times in 0 Posts	thanks for all your input, it was trully helpful and now i begin a new mission! hopefully ebay has what i need mac