Shooter Problem

CHRISW · 04-13-2008, 02:58 PM

I have a BYF 42 shooter that has a Sarco artillery barrel on it. It shoot great except the toggles do not completely close after each round. You have to do it by hand. Will a 40 pound Wolff main spring fix this problem? I have been shooting 124 grain Federals with 1120 fps at the muzzle. Thanks for your time and info. Chris

Ron Smith · 04-13-2008, 03:29 PM

Chris,

Is the hold open engaging and locking the bolt open? If so, try moderate velocity 115gr ammo. Don't use +P, it will damage your luger. Lugers often don't care for hot ammo or heavy bullets.

Ron

Steinar · 04-14-2008, 04:23 AM

Not sure if this can happen or not.. but I remember from a slow motion movie that the toggle bounces back a little after hitting the ramp, perhaps with that 'hot' ammunition, it bounces back to the point where firing pin gets locked up? Just a thought..

Lugerdoc · 04-14-2008, 09:50 AM

Chris, Since many new luger barrels are made short chambered (they expect the installer to do a final chamber ream for the correct headspacing, I'd check that first. Then check the recoil spring to be sure it is for a 9mm (19 to 21 turns), and finally try different ammo & mags to see if this makes a difference. Lugerdoc

04-13-2008, 02:58 PM	#1
CHRISW User Join Date: Mar 2007 Posts: 12 Thanks: 0 Thanked 0 Times in 0 Posts	Shooter Problem I have a BYF 42 shooter that has a Sarco artillery barrel on it. It shoot great except the toggles do not completely close after each round. You have to do it by hand. Will a 40 pound Wolff main spring fix this problem? I have been shooting 124 grain Federals with 1120 fps at the muzzle. Thanks for your time and info. Chris

04-13-2008, 03:29 PM	#2
Ron Smith User Join Date: Feb 2004 Location: Orygun Posts: 4,243 Thanks: 118 Thanked 245 Times in 150 Posts	Chris, Is the hold open engaging and locking the bolt open? If so, try moderate velocity 115gr ammo. Don't use +P, it will damage your luger. Lugers often don't care for hot ammo or heavy bullets. Ron __________________ I Still Need DWM side plate #49... if anyone runs across a nice one. What ~Rudyard Kipling~ said...

04-14-2008, 04:23 AM	#3
Steinar User Join Date: May 2004 Posts: 1,538 Thanks: 18 Thanked 36 Times in 21 Posts	Not sure if this can happen or not.. but I remember from a slow motion movie that the toggle bounces back a little after hitting the ramp, perhaps with that 'hot' ammunition, it bounces back to the point where firing pin gets locked up? Just a thought.. __________________ Previously known as Morgan Kane

04-14-2008, 09:50 AM	#4
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 737 Times in 484 Posts	Chris, Since many new luger barrels are made short chambered (they expect the installer to do a final chamber ream for the correct headspacing, I'd check that first. Then check the recoil spring to be sure it is for a 9mm (19 to 21 turns), and finally try different ammo & mags to see if this makes a difference. Lugerdoc __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode