Stock attaching iron from UK.

Purkins · 07-05-2005, 01:20 AM

http://www.gunsamerica.com/guns/976370656.htm

I've given up trying to find a board stock, original or repro, for my arty
and was thinking of making my own using this iron from cmr in the UK.

Will it be any good?

Would I need any other metal parts?

Thanks so much,

Eric

Sieger · 07-05-2005, 03:01 AM

Hi:

Just a few years ago, these were available here from several sources.

The problem is, that according to BATFE rules, only original stocks (or exact reproductions) can be attached to LP-08s and P-04s.

Oh well.

Sieger

Dwight Gruber · 07-05-2005, 03:11 AM

Sieger and Eric,

Go to this link http://www.lugerforum.com/BATF.html to see what the ATF says about reproduction shoulder stocks.

--Dwight

Sieger · 07-05-2005, 05:26 AM

Hi:

Yes, I've seen this letter before. It accompanied my Odin reproduction stock I purchased several years ago. The Odin stock is a perfect reproduction of the original stock, in dimensions anyway.

I suppose if one were to reproduce a stock to the exact original specs., the BATFE would be satisfied. I've haven't seen any of these offered lately.

Strangely, stocks for the Mauser C-96 and Browning P-35 seem to be available from China currently.

Sieger

Purkins · 07-05-2005, 12:03 PM

CMR in the UK reports that they will shortly have repro stocks for $142 pp. Unless I find a reasonably priced original I'll order one. I"ll tell the forum what I think of it.
I was going to trace the shape of an original, cut it out, and fit the iron to, that would meet BATFE requirements.
Thanks,

Eric

Ron Smith · 07-05-2005, 03:23 PM

Eric,

I have a repro stock and holster rig that I will sell. E-mail me if you are interested.

Ron

Lugerdoc · 07-14-2005, 09:58 AM

I have a couple of the CMR LPO8 stock irons avaliable here in the US @$75 each postpaid. Tom Heller

John Sabato · 07-14-2005, 11:26 AM

Eric, the stock you propose fabricating would have to be an exact duplicate in all aspects to pass ATF muster... that includes the cutout recess and strap slots...

Last time I looked, repro wood was available from Sarco and Gunpartscorp.com...

Pete Ebbink · 07-14-2005, 11:55 AM

Hi Eric,

Randy Bessler has a nice repro for sale :

http://www.collectorfirearms.us/Luge...ems/LI-266.htm

Here is the contact info :

http://www.collectorfirearms.us/

07-05-2005, 01:20 AM	#1
Purkins New User Join Date: Jun 2004 Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts	Stock attaching iron from UK. http://www.gunsamerica.com/guns/976370656.htm I've given up trying to find a board stock, original or repro, for my arty and was thinking of making my own using this iron from cmr in the UK. Will it be any good? Would I need any other metal parts? Thanks so much, Eric

07-05-2005, 03:01 AM	#2
Sieger User Join Date: Jul 2003 Location: New York, NY Posts: 1,579 Thanks: 2,154 Thanked 402 Times in 251 Posts	Attaching Iron Hi: Just a few years ago, these were available here from several sources. The problem is, that according to BATFE rules, only original stocks (or exact reproductions) can be attached to LP-08s and P-04s. Oh well. Sieger

07-05-2005, 05:26 AM	#4
Sieger User Join Date: Jul 2003 Location: New York, NY Posts: 1,579 Thanks: 2,154 Thanked 402 Times in 251 Posts	Luger Stocks Hi: Yes, I've seen this letter before. It accompanied my Odin reproduction stock I purchased several years ago. The Odin stock is a perfect reproduction of the original stock, in dimensions anyway. I suppose if one were to reproduce a stock to the exact original specs., the BATFE would be satisfied. I've haven't seen any of these offered lately. Strangely, stocks for the Mauser C-96 and Browning P-35 seem to be available from China currently. Sieger

07-05-2005, 03:23 PM	#6
Ron Smith User Join Date: Feb 2004 Location: Orygun Posts: 4,243 Thanks: 118 Thanked 245 Times in 150 Posts	Eric, I have a repro stock and holster rig that I will sell. E-mail me if you are interested. Ron __________________ I Still Need DWM side plate #49... if anyone runs across a nice one. What ~Rudyard Kipling~ said...

07-14-2005, 09:58 AM	#7
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 737 Times in 484 Posts	I have a couple of the CMR LPO8 stock irons avaliable here in the US @$75 each postpaid. Tom Heller __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net

07-05-2005, 03:11 AM	#3
Dwight Gruber User Join Date: Jun 2002 Location: Portland, Oregon Posts: 3,908 Thanks: 0 Thanked 1,330 Times in 435 Posts	Sieger and Eric, Go to this link http://www.lugerforum.com/BATF.html to see what the ATF says about reproduction shoulder stocks. --Dwight

07-05-2005, 12:03 PM	#5
Purkins New User Join Date: Jun 2004 Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts	CMR in the UK reports that they will shortly have repro stocks for $142 pp. Unless I find a reasonably priced original I'll order one. I"ll tell the forum what I think of it. I was going to trace the shape of an original, cut it out, and fit the iron to, that would meet BATFE requirements. Thanks, Eric

07-14-2005, 11:26 AM	#8
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,156 Thanks: 3,003 Thanked 2,309 Times in 1,098 Posts	Eric, the stock you propose fabricating would have to be an exact duplicate in all aspects to pass ATF muster... that includes the cutout recess and strap slots... Last time I looked, repro wood was available from Sarco and Gunpartscorp.com... __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

07-14-2005, 11:55 AM	#9
Pete Ebbink User Join Date: Jun 2002 Location: The USA Posts: 5,919 Thanks: 0 Thanked 7 Times in 5 Posts	Hi Eric, Randy Bessler has a nice repro for sale : http://www.collectorfirearms.us/Luge...ems/LI-266.htm Here is the contact info : http://www.collectorfirearms.us/

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode