Feeding problems !!

kidvett · 03-01-2004, 10:46 AM

Hello,

I just finished building a nice 6 inch shooter pistol ( rust blue, strawed parts, new barrel ) and did some test firing. I used 2 good magazines ( one current MecGar & one SE63 ) that are working in other pistols. Ammo is 124gr FMC. Here is the problem: rounds are caught upwards halfway in the chamber in an oblique angle ( bullet pointing top ) on the feeding cycle...Dummy rounds dont do it, only live ones when firing...

Throat on bottom edge of barrel has both top & botton edges sharp. I thought that polishing & smooting those 2 angles could cure the problem...

What do you think...

Thanks for the help,

Mark <img border="0" title="" alt="[Wink]" src="wink.gif" />

03-01-2004, 10:46 AM	#1
kidvett User Join Date: Jun 2002 Location: Montreal, Quebec Posts: 584 Thanks: 0 Thanked 3 Times in 3 Posts	Feeding problems !! Hello, I just finished building a nice 6 inch shooter pistol ( rust blue, strawed parts, new barrel ) and did some test firing. I used 2 good magazines ( one current MecGar & one SE63 ) that are working in other pistols. Ammo is 124gr FMC. Here is the problem: rounds are caught upwards halfway in the chamber in an oblique angle ( bullet pointing top ) on the feeding cycle...Dummy rounds dont do it, only live ones when firing... Throat on bottom edge of barrel has both top & botton edges sharp. I thought that polishing & smooting those 2 angles could cure the problem... What do you think... Thanks for the help, Mark <img border="0" title="" alt="[Wink]" src="wink.gif" />