Extension?

Puretexan · 06-06-2017, 10:43 AM

I see parts for a long extension and parts for a short
extension. I have a 20's luger and a 39 luger. I measured
them both and don't see any difference, other than one
has a 1/4'' longer barrel.
It did take me a while to actually see the difference in the
Mauser hump, so maybe I'm missing it.

sheepherder · 06-06-2017, 10:44 AM

Hmmmm...What did it say in the FAQ???

Puretexan · 06-06-2017, 11:19 AM

Sorry - no matches. Please try some different terms.

Lugerdoc · 06-06-2017, 11:44 AM

Tex, the 2 lugers that you mentioned both have the short receiver. The 1/4" longer receiver (barrel extention) is usually only found on most of the M1906 7.65mm and all M1900 grip safety type lugers and pre 08 Navies. Although I have seen some left over long receivers & frames that were used in the 1920s, usually on Carbines. TH

Chickenthief · 06-06-2017, 11:44 AM

Extension = shoulder stock?
Or what are you looking at where?

Edward Tinker · 06-06-2017, 11:52 AM

Extension should be the upper or receiver

Unless you try to put an early 1900 onto a newer frame it should just work (possibly slight modifications).

Here is the early frame tutorial that Ron Wood made up years ago

http://forum.lugerforum.com/showthread.php?t=3932

note - puretexan - you must be used to a typewriter as it looks like you hit the ''return'' each line

Puretexan · 06-06-2017, 11:54 AM

Thanks Lugerdoc. That is why I couldn't see the difference....I don't have the
right one. Guess I have to buy more.

Puretexan · 06-06-2017, 11:59 AM

Sorry Mr Tinker, I posted something somewhere and it cut the post into shorter
lines and looked really goofy. I got use to just hitting the return before it filled
up the whole page.

sheepherder · 06-06-2017, 12:18 PM

Quote:

Originally Posted by Puretexan

Sorry - no matches. Please try some different terms.

Hmmmm...Marc must have lost it...

SteveM · 06-10-2017, 01:45 PM

Quote:

Originally Posted by Puretexan

I see parts for a long extension and parts for a short
extension. I have a 20's luger and a 39 luger. I measured
them both and don't see any difference, other than one
has a 1/4'' longer barrel.
It did take me a while to actually see the difference in the
Mauser hump, so maybe I'm missing it.

Here is a visual for you, a 1906 upper on a long lower.

06-06-2017, 10:43 AM	#1
Puretexan User Join Date: May 2017 Location: Pearland Texas Posts: 176 Thanks: 11 Thanked 70 Times in 36 Posts	Extension? I see parts for a long extension and parts for a short extension. I have a 20's luger and a 39 luger. I measured them both and don't see any difference, other than one has a 1/4'' longer barrel. It did take me a while to actually see the difference in the Mauser hump, so maybe I'm missing it.

06-06-2017, 10:44 AM	#2
sheepherder Lifer Lifetime Forum Patron Join Date: Feb 2009 Location: ...on the 'ol Erie Canal... Posts: 8,197 Thanks: 1,416 Thanked 4,462 Times in 2,336 Posts	Hmmmm...What did it say in the FAQ??? __________________ I like my coffee the way I like my women... ...Cold and bitter...

06-06-2017, 11:44 AM	#4
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 737 Times in 484 Posts	Tex, the 2 lugers that you mentioned both have the short receiver. The 1/4" longer receiver (barrel extention) is usually only found on most of the M1906 7.65mm and all M1900 grip safety type lugers and pre 08 Navies. Although I have seen some left over long receivers & frames that were used in the 1920s, usually on Carbines. TH __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net

06-06-2017, 11:19 AM	#3
Puretexan User Join Date: May 2017 Location: Pearland Texas Posts: 176 Thanks: 11 Thanked 70 Times in 36 Posts	Sorry - no matches. Please try some different terms.

06-06-2017, 11:44 AM	#5
Chickenthief User Join Date: Dec 2016 Location: Denmark Posts: 135 Thanks: 0 Thanked 131 Times in 48 Posts	Extension = shoulder stock? Or what are you looking at where?

06-06-2017, 11:52 AM	#6
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,966 Thanks: 2,066 Thanked 4,595 Times in 2,116 Posts	Extension should be the upper or receiver Unless you try to put an early 1900 onto a newer frame it should just work (possibly slight modifications). Here is the early frame tutorial that Ron Wood made up years ago http://forum.lugerforum.com/showthread.php?t=3932 note - puretexan - you must be used to a typewriter as it looks like you hit the ''return'' each line

06-06-2017, 11:54 AM	#7
Puretexan User Join Date: May 2017 Location: Pearland Texas Posts: 176 Thanks: 11 Thanked 70 Times in 36 Posts	Thanks Lugerdoc. That is why I couldn't see the difference....I don't have the right one. Guess I have to buy more.

06-06-2017, 11:59 AM	#8
Puretexan User Join Date: May 2017 Location: Pearland Texas Posts: 176 Thanks: 11 Thanked 70 Times in 36 Posts	Sorry Mr Tinker, I posted something somewhere and it cut the post into shorter lines and looked really goofy. I got use to just hitting the return before it filled up the whole page.