Erfurt Artillery Rebarreled by Factory?

CPT Hello · 02-16-2017, 09:39 PM

Hello everyone,

I've come across what appears to be a (possible) matching example of a 1914 Erfurt. However, there appears to be a notch in the top of the frame (please see pictures below), looking to me suspiciously like this P08 used to have a longer artillery barrel and rear sight. If that's the case, would Erfurt or any other factory in Germany have rebarelled such a pistol (perhaps in order to comply with Versailles)? Or is this the work of a gunsmith or worse in a more recent time?

Edward Tinker · 02-16-2017, 09:45 PM

please take a look at the FAQ - you'll find that Erfurt was using the notch - although later

Quote:

In November, 1916, an amendment was
added to the P.08 Dimensional Tables that
allowed the receiver to be cut for the Artillery
rear sight.
Many Erfurt pistols dated 1916, 1917 and
1918 will be found with the receiver cut this
way. ("Imperial Lugers", Still, Pg. 61)
The discussion of the Erfurt proofed DWM
LP08 barrels came up on the old forum and
the consensus of opinion was that all LP08
barrels were made by Erfurt.

AND, yes there were 8 inch barrels rebarelled to 4 inch after the war - so it could be either - Erfurt only made artillery lugers in 1914 (and also 4 inch)

CPT Hello · 02-16-2017, 09:49 PM

Great; thank you Edward, exactly what I was looking for.

George Anderson · 02-17-2017, 06:36 AM

It's a reworked artillery.

lugerholsterrepair · 02-17-2017, 10:28 AM

George, Inquiring minds wanting to know how you know that? The position of the date?

George Anderson · 02-17-2017, 10:37 AM

Quote:

Originally Posted by lugerholsterrepair

George, Inquiring minds wanting to know how you know that? The position of the date?

1914 P08s don not have a notch cut for the LP08 barrel. All subsequent years' P08s do.

lugerholsterrepair · 02-17-2017, 11:02 AM

AHA! I continue to learn. Thanks..

02-16-2017, 09:39 PM	#1
CPT Hello User Join Date: Feb 2017 Location: The West Posts: 6 Thanks: 2 Thanked 1 Time in 1 Post	Erfurt Artillery Rebarreled by Factory? Hello everyone, I've come across what appears to be a (possible) matching example of a 1914 Erfurt. However, there appears to be a notch in the top of the frame (please see pictures below), looking to me suspiciously like this P08 used to have a longer artillery barrel and rear sight. If that's the case, would Erfurt or any other factory in Germany have rebarelled such a pistol (perhaps in order to comply with Versailles)? Or is this the work of a gunsmith or worse in a more recent time? Attached Thumbnails

02-17-2017, 10:28 AM	#5
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,775 Thanks: 4,995 Thanked 3,133 Times in 1,439 Posts	George, Inquiring minds wanting to know how you know that? The position of the date? __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."

02-17-2017, 11:02 AM	#7
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,775 Thanks: 4,995 Thanked 3,133 Times in 1,439 Posts	AHA! I continue to learn. Thanks.. __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."

02-16-2017, 09:49 PM	#3
CPT Hello User Join Date: Feb 2017 Location: The West Posts: 6 Thanks: 2 Thanked 1 Time in 1 Post	Great; thank you Edward, exactly what I was looking for.

02-17-2017, 06:36 AM	#4
George Anderson Lifer Lifetime Forum Patron Join Date: Jul 2002 Location: VA Posts: 3,592 Thanks: 1,773 Thanked 2,531 Times in 788 Posts	It's a reworked artillery.