Luger rework

JRS · 08-22-2010, 06:56 PM

I have a 1914 DWM Luger with a 1920 government breech tag. The frame number is 7097. The receiver number is 5384. There is a 97 on the trigger side plate. Beside that number is what appears to be an eagle stamped over the numeral "6." Does that mean it is possibly a Simson rework? I have a photo, but the instructions in the Stickies do not seem to be up to date. I find none of the links listed in submitting new threads.

mrerick · 08-22-2010, 08:29 PM

The Eagle over 6 is an inspection stamp that was used at Simson. Probably a Simson trigger plate on a rework. 1920 is the German property mark during the Wiemar era.

Sounds like it's a mismatched receiver. Do other parts (barrel, small numbered parts) match the frame?

There should be a suffix letter under the frame serial number. It's part of the serial as well.

Marc

JRS · 08-23-2010, 10:21 AM

Barrel number matches receiver number. Can.t make out the number below barrel number, but it ends in a "2."Whole bunch of 77s on toggle and extractor, which match only themselves and no match to anything else on the gun. I guess I have a mismatched mess, but I do like the Simson stamp. Anyhow, it's still a pretty good shooter. I like it.

mrerick · 08-23-2010, 03:44 PM

The number below the barrel serial number could be "8.82" which would be the barrel gauge for a 9mm Luger.

Sounds like a mis-match toggle train. So... a "shooter" it is. Have you taken it out and fired it yet? How's it function? One great thing about a mismatch is that you don't have to worry about the value dropping if a part breaks. Takes the anxiety out of firing it!

Congratulations again!

Marc

JRS · 08-23-2010, 05:32 PM

I've fired it several times, but what I have found is that the more modern Mauser Lugers are better shooters than the WWI models. Therefore, I am concentrating on Mausers because I'm more interested in shooting than in safe queens. Besides, Simpson Ltd. likes to see me increase their profit margin.

Edward Tinker · 08-23-2010, 11:31 PM

new collector area has a tutorial to post pictures....

Does it have a sear safety (see FAQ) if unsure what a sear safety is.

The 1920 is a gov't stamping, not for reworks, etc, although if it is the only number there,it could very well be the date.

Simson did rework, they also supplied accepted barrels for the police and so they shipped the guns as 7.65mm and the police changed the barrels.

Ed

JRS · 08-24-2010, 03:27 PM

Ed,

Gun does not have a sear safety. I checked the post pics tutorial stickie, but every time I try to retrieve the picture from my PC picture file, it states "Download Failed." Seems like something wrong between Forum Browse and my PC. It makes me wonder if I have to re-size the picture to get it to make the journey from my PC to the Forum.

jonnyc · 08-24-2010, 10:44 PM

If Simson did an extensive rebuild on a Luger, would they have ever mated an unmatched frame and receiver together?

08-22-2010, 06:56 PM	#1
JRS User Join Date: May 2010 Location: Virginia Beach, VA 23452 Posts: 81 Thanks: 0 Thanked 3 Times in 3 Posts	Luger rework I have a 1914 DWM Luger with a 1920 government breech tag. The frame number is 7097. The receiver number is 5384. There is a 97 on the trigger side plate. Beside that number is what appears to be an eagle stamped over the numeral "6." Does that mean it is possibly a Simson rework? I have a photo, but the instructions in the Stickies do not seem to be up to date. I find none of the links listed in submitting new threads.

08-22-2010, 08:29 PM	#2
mrerick Super Moderator - Patron LugerForum Life Patron Join Date: Dec 2009 Location: Eastern North Carolina, USA Posts: 3,920 Thanks: 1,377 Thanked 3,135 Times in 1,518 Posts	The Eagle over 6 is an inspection stamp that was used at Simson. Probably a Simson trigger plate on a rework. 1920 is the German property mark during the Wiemar era. Sounds like it's a mismatched receiver. Do other parts (barrel, small numbered parts) match the frame? There should be a suffix letter under the frame serial number. It's part of the serial as well. Marc __________________ Igitur si vis pacem, para bellum - - Therefore if you want peace, prepare for war.

08-23-2010, 03:44 PM	#4
mrerick Super Moderator - Patron LugerForum Life Patron Join Date: Dec 2009 Location: Eastern North Carolina, USA Posts: 3,920 Thanks: 1,377 Thanked 3,135 Times in 1,518 Posts	The number below the barrel serial number could be "8.82" which would be the barrel gauge for a 9mm Luger. Sounds like a mis-match toggle train. So... a "shooter" it is. Have you taken it out and fired it yet? How's it function? One great thing about a mismatch is that you don't have to worry about the value dropping if a part breaks. Takes the anxiety out of firing it! Congratulations again! Marc __________________ Igitur si vis pacem, para bellum - - Therefore if you want peace, prepare for war.

08-23-2010, 11:31 PM	#6
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,967 Thanks: 2,066 Thanked 4,596 Times in 2,117 Posts	new collector area has a tutorial to post pictures.... Does it have a sear safety (see FAQ) if unsure what a sear safety is. The 1920 is a gov't stamping, not for reworks, etc, although if it is the only number there,it could very well be the date. Simson did rework, they also supplied accepted barrels for the police and so they shipped the guns as 7.65mm and the police changed the barrels. Ed __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

08-23-2010, 10:21 AM	#3
JRS User Join Date: May 2010 Location: Virginia Beach, VA 23452 Posts: 81 Thanks: 0 Thanked 3 Times in 3 Posts	Barrel number matches receiver number. Can.t make out the number below barrel number, but it ends in a "2."Whole bunch of 77s on toggle and extractor, which match only themselves and no match to anything else on the gun. I guess I have a mismatched mess, but I do like the Simson stamp. Anyhow, it's still a pretty good shooter. I like it.

08-23-2010, 05:32 PM	#5
JRS User Join Date: May 2010 Location: Virginia Beach, VA 23452 Posts: 81 Thanks: 0 Thanked 3 Times in 3 Posts	I've fired it several times, but what I have found is that the more modern Mauser Lugers are better shooters than the WWI models. Therefore, I am concentrating on Mausers because I'm more interested in shooting than in safe queens. Besides, Simpson Ltd. likes to see me increase their profit margin.

08-24-2010, 03:27 PM	#7
JRS User Join Date: May 2010 Location: Virginia Beach, VA 23452 Posts: 81 Thanks: 0 Thanked 3 Times in 3 Posts	Ed, Gun does not have a sear safety. I checked the post pics tutorial stickie, but every time I try to retrieve the picture from my PC picture file, it states "Download Failed." Seems like something wrong between Forum Browse and my PC. It makes me wonder if I have to re-size the picture to get it to make the journey from my PC to the Forum.

08-24-2010, 10:44 PM	#8
jonnyc User Join Date: Dec 2008 Posts: 425 Thanks: 2 Thanked 46 Times in 34 Posts	If Simson did an extensive rebuild on a Luger, would they have ever mated an unmatched frame and receiver together?