Erfurt Magazine Mystery

BadWolf · 05-18-2024, 06:38 PM

New to the forum, and just picked up a super-clean 1914 Erfurt LP-08 Artillery. I'm not a "condition collector", but all the parts do happen to match, except...

I'm a bit suspicious of the magazine. As you can see in the photos, the wood mag bottom is stamped with the matching serial number, as well as the two imperial proof marks. However, the mag tube has the "D" shaped crimp near the top, which several sources indicate is characteristic of DWM magazines, not Erfurt. So what are your thoughts on what I have here?

Erfurt ran out of tubes and sourced some from DWM?

Someone damaged the feed lips and swapped out the tube with a good DWM one, but keeping the original wood bottom? (seems unlikely)

Or did some turkey actually go to the trouble of getting an old unmarked DWM mag and FAKE the serial numbers and the proof marks? (this also seems pretty unlikely but greed can be a powerful motivator).

Something I haven't thought of?

My reason for asking is not to go after the seller, as I love the pistol and the price was fair, but I would not clean and load an ORIGINAL MATCHING wood mag for actual firing, but would have no problem doing that with a repro/fake.

Your thoughts, kind experts.

Edward Tinker · 05-18-2024, 07:53 PM

Looks ok to me, except its fairly nice. Show us a left and right so we can see if the pin has been in and out.

Over the years I've swapped bases that were broken onto a nice body, and not worth a hoot on telling if erfurt or dwm unless i really try hard.

BadWolf · 05-18-2024, 08:38 PM

Side photos of mag

Bill_in_VA · 05-19-2024, 10:01 AM

I have a similar early Erfurt magazine with the “D” shaped crimp, so I’m also curious to hear.

ithacaartist · 05-19-2024, 08:32 PM

The mag bottom displays rather crusty looking "dishes," while the bottom is smooth and clean, and appears recently finished. The parts of the knobs' circumferences that become flatter when the serial number is removed look pretty danged flattened to me. The pins don't seem to have been disturbed, so my sense is that it's a DWM mag that was force-matched to this pistol.

The digits of the font used to number the mag should be compared to others known to have been marked at that time, which may yield further clues.

It would be a shame to blow out the bottom of an original mag, whether it's been doctored or not. Grab a couple Mec-Gar mags next chance you get, and use those for shooting.

BadWolf · 05-20-2024, 07:07 PM

Thank you Ithaca Artist - a reworked mag SN does seem the most probable.

But as you suggested, I looked at the font of the SN stamp on the mag in question, and though I have no other period mags to compare it to, I DO have the gun. And here it is...

The font on the mag IS a close match to the SN font on the gun itself. And then we have the two inspection marks on the mag bottom, AND it even appears that the script "f" as the alphabet part of the SN was put on there as well (unless that's a dent). Is it a dent? Anyway, seems like the extra markings beyond the SN itself are a lot of effort to go through to fake up a mag.

So I had a thought. It appears the gun has rework/repair marks on it - could the mag have been reworked at the factory?

And one final general comment - I noticed there are inspection marks on the GRIP SCREWS! I love it! As a person of German/Swedish descent myself, this kind of anal retentiveness really resonates with me.

ithacaartist · 05-21-2024, 01:47 AM

Yep, that's part of the charm of an Erfurt!

The font on the mag looks reasonable, but I'm pretty sure my knowledge would demonstrate the Peter Principle beyond this.

Doubs · 05-21-2024, 02:22 AM

The last year that Erfurt put inspection stamps on the grip screws was 1914. For someone who has a 1914 or earlier Erfurt, those screws can be hard to find... and expensive.

BadWolf · 05-21-2024, 10:20 AM

Well how that mag and gun came together is still a cool story, even if it's not the one I would have preferred. My vision: A dark smoky room, somewhere in an industrial area of France, where they labor over their illicit stamps and mismatched Lugers and cackle "HaHa, we will fix those stupid Americans!" Sadly I'm that guy.

Mac Cat · 05-21-2024, 01:47 PM

This is why I love Erfurt's !
Thanks for sharing yours

BadWolf · 05-21-2024, 03:36 PM

You're welcome, and thank you all for the responses!

klaus 3338 · Yesterday, 04:05 AM

Sorry, but I see a DWM magazine with faked acceptance marks on the wood.

Bill_in_VA · Yesterday, 08:37 AM

Those rc’d grip screws are a new one on me!

BadWolf · Yesterday, 04:59 PM

The lazy buggers could have at least faked the right magazine! I'm a bit disappointed now.

I collect antique Griswold cast iron cookware - and there are jerks out there reproducing THAT! Seriously. A fake frypan.

05-18-2024, 06:38 PM	#1
BadWolf User Join Date: May 2024 Posts: 6 Thanks: 0 Thanked 1 Time in 1 Post	Erfurt Magazine Mystery New to the forum, and just picked up a super-clean 1914 Erfurt LP-08 Artillery. I'm not a "condition collector", but all the parts do happen to match, except... I'm a bit suspicious of the magazine. As you can see in the photos, the wood mag bottom is stamped with the matching serial number, as well as the two imperial proof marks. However, the mag tube has the "D" shaped crimp near the top, which several sources indicate is characteristic of DWM magazines, not Erfurt. So what are your thoughts on what I have here? Erfurt ran out of tubes and sourced some from DWM? Someone damaged the feed lips and swapped out the tube with a good DWM one, but keeping the original wood bottom? (seems unlikely) Or did some turkey actually go to the trouble of getting an old unmarked DWM mag and FAKE the serial numbers and the proof marks? (this also seems pretty unlikely but greed can be a powerful motivator). Something I haven't thought of? My reason for asking is not to go after the seller, as I love the pistol and the price was fair, but I would not clean and load an ORIGINAL MATCHING wood mag for actual firing, but would have no problem doing that with a repro/fake. Your thoughts, kind experts. Attached Thumbnails

05-18-2024, 07:53 PM	#2
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,915 Thanks: 1,989 Thanked 4,506 Times in 2,080 Posts	Looks ok to me, except its fairly nice. Show us a left and right so we can see if the pin has been in and out. Over the years I've swapped bases that were broken onto a nice body, and not worth a hoot on telling if erfurt or dwm unless i really try hard. __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

05-18-2024, 08:38 PM	#3
BadWolf User Join Date: May 2024 Posts: 6 Thanks: 0 Thanked 1 Time in 1 Post	Side photos of mag Attached Thumbnails

05-19-2024, 10:01 AM	#4
Bill_in_VA User Join Date: Nov 2013 Location: Southwest Virginia Posts: 349 Thanks: 735 Thanked 473 Times in 180 Posts	I have a similar early Erfurt magazine with the “D” shaped crimp, so I’m also curious to hear. __________________ John 8:32 reive (riːv) vb (Military) (intr) dialect Scot and Northern English to go on a plundering raid [variant of reave] ˈreiver n e.g., " Some view the Border Reivers as loveable rogues."

05-19-2024, 08:32 PM	#5
ithacaartist Twice a Lifer Lifetime Forum Patron Join Date: Mar 2011 Location: Atop the highest hill in Schuyler County NY Posts: 3,288 Thanks: 7,033 Thanked 2,482 Times in 1,323 Posts	The mag bottom displays rather crusty looking "dishes," while the bottom is smooth and clean, and appears recently finished. The parts of the knobs' circumferences that become flatter when the serial number is removed look pretty danged flattened to me. The pins don't seem to have been disturbed, so my sense is that it's a DWM mag that was force-matched to this pistol. The digits of the font used to number the mag should be compared to others known to have been marked at that time, which may yield further clues. It would be a shame to blow out the bottom of an original mag, whether it's been doctored or not. Grab a couple Mec-Gar mags next chance you get, and use those for shooting. __________________ "... Liberty is the seed and soil, the air and light, the dew and rain of progress, love and joy."-- Robert Greene Ingersoll 1894

05-20-2024, 07:07 PM	#6
BadWolf User Join Date: May 2024 Posts: 6 Thanks: 0 Thanked 1 Time in 1 Post	Thank you Ithaca Artist - a reworked mag SN does seem the most probable. But as you suggested, I looked at the font of the SN stamp on the mag in question, and though I have no other period mags to compare it to, I DO have the gun. And here it is... The font on the mag IS a close match to the SN font on the gun itself. And then we have the two inspection marks on the mag bottom, AND it even appears that the script "f" as the alphabet part of the SN was put on there as well (unless that's a dent). Is it a dent? Anyway, seems like the extra markings beyond the SN itself are a lot of effort to go through to fake up a mag. So I had a thought. It appears the gun has rework/repair marks on it - could the mag have been reworked at the factory? And one final general comment - I noticed there are inspection marks on the GRIP SCREWS! I love it! As a person of German/Swedish descent myself, this kind of anal retentiveness really resonates with me. Attached Thumbnails

05-21-2024, 01:47 AM	#7
ithacaartist Twice a Lifer Lifetime Forum Patron Join Date: Mar 2011 Location: Atop the highest hill in Schuyler County NY Posts: 3,288 Thanks: 7,033 Thanked 2,482 Times in 1,323 Posts	Yep, that's part of the charm of an Erfurt! The font on the mag looks reasonable, but I'm pretty sure my knowledge would demonstrate the Peter Principle beyond this. __________________ "... Liberty is the seed and soil, the air and light, the dew and rain of progress, love and joy."-- Robert Greene Ingersoll 1894

05-21-2024, 02:22 AM	#8
Doubs User Join Date: Jun 2002 Location: Byron, Georgia Posts: 1,671 Thanks: 771 Thanked 1,617 Times in 526 Posts	The last year that Erfurt put inspection stamps on the grip screws was 1914. For someone who has a 1914 or earlier Erfurt, those screws can be hard to find... and expensive.

05-21-2024, 10:20 AM	#9
BadWolf User Join Date: May 2024 Posts: 6 Thanks: 0 Thanked 1 Time in 1 Post	Well how that mag and gun came together is still a cool story, even if it's not the one I would have preferred. My vision: A dark smoky room, somewhere in an industrial area of France, where they labor over their illicit stamps and mismatched Lugers and cackle "HaHa, we will fix those stupid Americans!" Sadly I'm that guy.

05-21-2024, 01:47 PM	#10
Mac Cat Lifer Lifetime Forum Patron Join Date: Apr 2015 Location: Austin, Texas Posts: 675 Thanks: 2,021 Thanked 545 Times in 294 Posts	This is why I love Erfurt's ! Thanks for sharing yours

05-21-2024, 03:36 PM	#11
BadWolf User Join Date: May 2024 Posts: 6 Thanks: 0 Thanked 1 Time in 1 Post	You're welcome, and thank you all for the responses!

Yesterday, 04:05 AM	#12
klaus 3338 User Join Date: Jun 2009 Location: Germany Posts: 517 Thanks: 0 Thanked 405 Times in 160 Posts	Sorry, but I see a DWM magazine with faked acceptance marks on the wood.

Yesterday, 08:37 AM	#13
Bill_in_VA User Join Date: Nov 2013 Location: Southwest Virginia Posts: 349 Thanks: 735 Thanked 473 Times in 180 Posts	Those rc’d grip screws are a new one on me! __________________ John 8:32 reive (riːv) vb (Military) (intr) dialect Scot and Northern English to go on a plundering raid [variant of reave] ˈreiver n e.g., " Some view the Border Reivers as loveable rogues."

Yesterday, 04:59 PM	#14
BadWolf User Join Date: May 2024 Posts: 6 Thanks: 0 Thanked 1 Time in 1 Post	The lazy buggers could have at least faked the right magazine! I'm a bit disappointed now. I collect antique Griswold cast iron cookware - and there are jerks out there reproducing THAT! Seriously. A fake frypan.