What to look for...

triggerhappy · 09-07-2004, 06:06 PM

I am planning tu buy a luger for shooting. Not for collecting. So the most important thing is that it has to be accurate and work well. What should I look for on the gun? Any weak points that I have to check? I have never bought a used gun before so a little help would be appreciated...

Edward Tinker · 09-07-2004, 06:16 PM

Rikard, decide what you want. There are many models to choose from, including brand new and fairly new made lugers. Orimar (sp) makes them presently, so you could ahve a brand new one, or you could buy a Mauser made during the 1970's, semi-collectable, strong and just like new.

Or you can buy a WW1, Weimar or WW2 era. As a rep piece, you might want to buy a "mismatch" from any era, and shoot the shirt out of it. There is a nickled piece for sale right now on the forum, have no idea if it is worth a darn, but check it out!

btw, I will probably move this thread to the discussion board,

Ed

triggerhappy · 09-07-2004, 07:09 PM

I can tell you right now what I want. An old luger, 1920-1941 or something like that. Blued. Nothing New, and nothing nickled or stainless. What I want to know is what to look for when I have the gun in my hand, before deciding if I want do buy it. (what are the weak points on the gun that can break and be expensive to repair?)

Edward Tinker · 09-07-2004, 07:21 PM

Take a look here:

http://forums.lugerforum.com/lugerfo...=000384#000001

and

http://forums.lugerforum.com/cgi-bin...c;f=8;t=000326

Parts do break, but if it is a shooter, then shoot it till it breaks? Then buy a new part. Lots of shooters for sale around, especially on gunbroker, just think of which round, 7.65 expensive, or 9mm. do searches on this forum, read around and decide what you'd like.

Ed

triggerhappy · 09-08-2004, 02:14 PM

Thank you for the links Edward.
Once I have it I will shoot it until it breaks and then repair it. What I am interersted in is a few tips how do decide if the condition is good enough to buy and avoid paying far more than the gun is worth.

Gunbroker is an American site, right? That means it is a little difficult to buy there since I live in Sweden. So the easiest way is probably to buy from a local gundealer or at an gun auction. If I buy it at an auction I will not be able to shoot it first and that is the reason for my questions.

John Sabato · 09-08-2004, 03:46 PM

triggerhappy, do a search of the shooting reloading and malfunction forum for the name "HÃ?Â¥kan Spuhr"... his member number is 198. He is a Swedish gunsmith specializing in the Luger...

He should be able to advise you about a good Luger to purchase...

This is his website, but I can't read any of it since it is all in Swedish... It used to be also in English, but that has changed.

http://www.defendor.se/

09-07-2004, 06:06 PM	#1
triggerhappy User Join Date: May 2004 Posts: 9 Thanks: 0 Thanked 0 Times in 0 Posts	What to look for... I am planning tu buy a luger for shooting. Not for collecting. So the most important thing is that it has to be accurate and work well. What should I look for on the gun? Any weak points that I have to check? I have never bought a used gun before so a little help would be appreciated...

09-07-2004, 06:16 PM	#2
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,963 Thanks: 2,064 Thanked 4,592 Times in 2,114 Posts	Rikard, decide what you want. There are many models to choose from, including brand new and fairly new made lugers. Orimar (sp) makes them presently, so you could ahve a brand new one, or you could buy a Mauser made during the 1970's, semi-collectable, strong and just like new. Or you can buy a WW1, Weimar or WW2 era. As a rep piece, you might want to buy a "mismatch" from any era, and shoot the shirt out of it. There is a nickled piece for sale right now on the forum, have no idea if it is worth a darn, but check it out! btw, I will probably move this thread to the discussion board, Ed __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

09-07-2004, 07:21 PM	#4
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,963 Thanks: 2,064 Thanked 4,592 Times in 2,114 Posts	Take a look here: http://forums.lugerforum.com/lugerfo...=000384#000001 and http://forums.lugerforum.com/cgi-bin...c;f=8;t=000326 Parts do break, but if it is a shooter, then shoot it till it breaks? Then buy a new part. Lots of shooters for sale around, especially on gunbroker, just think of which round, 7.65 expensive, or 9mm. do searches on this forum, read around and decide what you'd like. Ed __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

09-08-2004, 03:46 PM	#6
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,155 Thanks: 3,003 Thanked 2,308 Times in 1,098 Posts	triggerhappy, do a search of the shooting reloading and malfunction forum for the name "HÃ?Â¥kan Spuhr"... his member number is 198. He is a Swedish gunsmith specializing in the Luger... He should be able to advise you about a good Luger to purchase... This is his website, but I can't read any of it since it is all in Swedish... It used to be also in English, but that has changed. http://www.defendor.se/ __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-07-2004, 07:09 PM	#3
triggerhappy User Join Date: May 2004 Posts: 9 Thanks: 0 Thanked 0 Times in 0 Posts	I can tell you right now what I want. An old luger, 1920-1941 or something like that. Blued. Nothing New, and nothing nickled or stainless. What I want to know is what to look for when I have the gun in my hand, before deciding if I want do buy it. (what are the weak points on the gun that can break and be expensive to repair?)

09-08-2004, 02:14 PM	#5
triggerhappy User Join Date: May 2004 Posts: 9 Thanks: 0 Thanked 0 Times in 0 Posts	Thank you for the links Edward. Once I have it I will shoot it until it breaks and then repair it. What I am interersted in is a few tips how do decide if the condition is good enough to buy and avoid paying far more than the gun is worth. Gunbroker is an American site, right? That means it is a little difficult to buy there since I live in Sweden. So the easiest way is probably to buy from a local gundealer or at an gun auction. If I buy it at an auction I will not be able to shoot it first and that is the reason for my questions.