1900 ae 22

wlyon · 05-02-2017, 03:30 PM

I had this on here a few years ago but we have a lot of newer members since then who have not seen it.
1900 AE Serial #10317 converted ,by a very clever and skilled old gunsmith to a 22 auto. The original firing pin and bolt face converted for 22 rimfire. The loading ramp was changed for a 22. Spring changed to coil. Rear of toggle cut to reduce weight also holes drilled. Barrel cut off so the original serial number shows. The mag is an original wood bottom with a 22 Erma insert. All in all quite a gunsmithing exercise. Ron Wood has commented on the skill of this Gentlemen. Bill
.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

05-02-2017, 03:30 PM	#1
wlyon Lifer 2X Lifetime Forum Patron Join Date: May 2005 Location: Somewhere in Montana Posts: 2,652 Thanks: 3,210 Thanked 2,613 Times in 969 Posts	1900 ae 22 I had this on here a few years ago but we have a lot of newer members since then who have not seen it. 1900 AE Serial #10317 converted ,by a very clever and skilled old gunsmith to a 22 auto. The original firing pin and bolt face converted for 22 rimfire. The loading ramp was changed for a 22. Spring changed to coil. Rear of toggle cut to reduce weight also holes drilled. Barrel cut off so the original serial number shows. The mag is an original wood bottom with a 22 Erma insert. All in all quite a gunsmithing exercise. Ron Wood has commented on the skill of this Gentlemen. Bill . Attached Thumbnails __________________ Bill Lyon Last edited by wlyon; 05-02-2017 at 05:04 PM. Reason: Need Caps