Todays experiences!

G.T. · 07-23-2022, 12:00 AM

Just when you think you have a pretty good grip on things, something you've never seen before jumps up! So it was today.. I had the opportunity to troubleshoot a mint, as new, Mauser 06/29 Parabellum, and the description of the problem didn't reall make any sense to me?

the owner said the Luger would stick in the holdopen position if more that 4 rounds were loaded, or something to the effect. I must admit, I really kind of tossed out the description, and decided to make my own evaluation. So, I loaded up the magazine with eight dummy rounds and they all went thru slicker then hammered owl S@@it! So I said, must be fixed, although at this point i had done nothing to correct any type of issue? So, believing the customer, I tried it again, and low and behold, (sounds pretty authoritive!) it got to round number four and the thing seazed up like a stainless cross thread! :

Upon a closer inspection, I could see the round was actually stuck, solidly, in the feed lips on the magazine! Tried the cycle again with my shooter Mec-Gar test mag several times, and all worked perfectly... OK, that means only, I know more know than I did at 11:00 am this morning! Best to all, til.....lat'r.....GT

Doubs · 07-23-2022, 12:13 AM

G.T., I've found that when reloading cartridges for the Luger that bullet profile and OAL matters. If either isn't right, they will stick in the magazine. Sometimes they hang up in the magazine catch notch. Lugers can make life interesting.

07-23-2022, 12:00 AM	#1
G.T. Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: Chandler Arizona Posts: 3,523 Thanks: 1,321 Thanked 3,707 Times in 1,012 Posts	Todays experiences! Just when you think you have a pretty good grip on things, something you've never seen before jumps up! So it was today.. I had the opportunity to troubleshoot a mint, as new, Mauser 06/29 Parabellum, and the description of the problem didn't reall make any sense to me? the owner said the Luger would stick in the holdopen position if more that 4 rounds were loaded, or something to the effect. I must admit, I really kind of tossed out the description, and decided to make my own evaluation. So, I loaded up the magazine with eight dummy rounds and they all went thru slicker then hammered owl S@@it! So I said, must be fixed, although at this point i had done nothing to correct any type of issue? So, believing the customer, I tried it again, and low and behold, (sounds pretty authoritive!) it got to round number four and the thing seazed up like a stainless cross thread! : Upon a closer inspection, I could see the round was actually stuck, solidly, in the feed lips on the magazine! Tried the cycle again with my shooter Mec-Gar test mag several times, and all worked perfectly... OK, that means only, I know more know than I did at 11:00 am this morning! Best to all, til.....lat'r.....GT

07-23-2022, 12:13 AM	#2
Doubs User Join Date: Jun 2002 Location: Byron, Georgia Posts: 1,735 Thanks: 819 Thanked 1,767 Times in 584 Posts	G.T., I've found that when reloading cartridges for the Luger that bullet profile and OAL matters. If either isn't right, they will stick in the magazine. Sometimes they hang up in the magazine catch notch. Lugers can make life interesting.