Highlight material

siegersallee · 04-14-2013, 10:39 AM

Hi all,

What is best or perferred material to use to highlight the stamps and serial numbers on Lugers (or any weapon)?

I am thinking a white grease pencil but I'd likie to capture other thoughts.

Richard

SteveM · 04-14-2013, 11:02 AM

I have used grease pencil but there are other options out there. Lacquer sticks from Brownells
comes to mind but I have never used it.

Ron Smith · 04-14-2013, 11:21 AM

Brownells "Lacquer-Stiks" are the best. It adheres very well, yet is easily removed with a bit of oil and a tooth brush.

http://www.brownells.com/gunsmith-to...-prod7778.aspx

Ben M. · 04-14-2013, 11:37 AM

love the avatar...popeye on 'roids.

alvin · 04-14-2013, 12:44 PM

Once I liked highlighting. Later hated it -- it hides the edge of stamping and halo. Luckily, easily removable via a little bit Acetone.

siegersallee · 04-14-2013, 01:14 PM

Would the lacquer in "Lacquer-Stiks" be harmful to the finish?

Ron Smith · 04-14-2013, 01:58 PM

Quote:

Originally Posted by siegersallee

Would the lacquer in "Lacquer-Stiks" be harmful to the finish?

No, not at all...

siegersallee · 04-14-2013, 02:10 PM

Ok, then...thanks for the link...I'll get some!

rhuff · 04-14-2013, 03:50 PM

I have been using lacquer sticks for many many years, and have never had it damage the finish on anything that I used it on. Just be sure to get the area clean/degreased before applying the color.

siegersallee · 04-15-2013, 06:51 AM

What would be a good degreaser to use for this?

ithacaartist · 04-15-2013, 10:44 AM

Acetone should remove oily residue safely. Consider a soft, natural-bristled brush to clean the tiny depressions, as synthetic bristles--and plastic brushes, as well--tend to dissolve in acetone...

rhuff · 04-15-2013, 04:24 PM

I have had good luck with lacquer thinner and Q-tips for degreasing. There are other solutions like 91% alcohol, acetone, MEK, etc. I keep lacquer thinner in my shop all the time, so it is what I reach for first.

04-14-2013, 10:39 AM	#1
siegersallee User Join Date: Apr 2012 Location: Atlanta, GA Posts: 292 Thanks: 107 Thanked 57 Times in 34 Posts	Highlight material Hi all, What is best or perferred material to use to highlight the stamps and serial numbers on Lugers (or any weapon)? I am thinking a white grease pencil but I'd likie to capture other thoughts. Richard __________________ "Für Gott, Kaiser, und Vaterland" -seeking: Erfrut Mag 1229 (no script)

04-14-2013, 11:21 AM	#3
Ron Smith User Join Date: Feb 2004 Location: Orygun Posts: 4,243 Thanks: 118 Thanked 245 Times in 150 Posts	Brownells "Lacquer-Stiks" are the best. It adheres very well, yet is easily removed with a bit of oil and a tooth brush. http://www.brownells.com/gunsmith-to...-prod7778.aspx __________________ I Still Need DWM side plate #49... if anyone runs across a nice one. What ~Rudyard Kipling~ said...

04-14-2013, 01:14 PM	#6
siegersallee User Join Date: Apr 2012 Location: Atlanta, GA Posts: 292 Thanks: 107 Thanked 57 Times in 34 Posts	Would the lacquer in "Lacquer-Stiks" be harmful to the finish? __________________ "Für Gott, Kaiser, und Vaterland" -seeking: Erfrut Mag 1229 (no script)

04-14-2013, 02:10 PM	#8
siegersallee User Join Date: Apr 2012 Location: Atlanta, GA Posts: 292 Thanks: 107 Thanked 57 Times in 34 Posts	Ok, then...thanks for the link...I'll get some! __________________ "Für Gott, Kaiser, und Vaterland" -seeking: Erfrut Mag 1229 (no script)

04-15-2013, 06:51 AM	#10
siegersallee User Join Date: Apr 2012 Location: Atlanta, GA Posts: 292 Thanks: 107 Thanked 57 Times in 34 Posts	What would be a good degreaser to use for this? __________________ "Für Gott, Kaiser, und Vaterland" -seeking: Erfrut Mag 1229 (no script)

04-14-2013, 11:02 AM	#2
SteveM User Join Date: Jun 2002 Location: Texas Posts: 1,016 Thanks: 94 Thanked 275 Times in 137 Posts	I have used grease pencil but there are other options out there. Lacquer sticks from Brownells comes to mind but I have never used it.

04-14-2013, 11:37 AM	#4
Ben M. User Join Date: Dec 2009 Location: Retired to Naples, FL. Posts: 484 Thanks: 85 Thanked 121 Times in 81 Posts	love the avatar...popeye on 'roids.

04-14-2013, 12:44 PM	#5
alvin User Join Date: Jul 2007 Location: US Posts: 3,843 Thanks: 132 Thanked 729 Times in 438 Posts	Once I liked highlighting. Later hated it -- it hides the edge of stamping and halo. Luckily, easily removable via a little bit Acetone.

04-14-2013, 03:50 PM	#9
rhuff Patron LugerForum Patron Join Date: Mar 2011 Location: Az. Posts: 2,288 Thanks: 2,702 Thanked 971 Times in 716 Posts	I have been using lacquer sticks for many many years, and have never had it damage the finish on anything that I used it on. Just be sure to get the area clean/degreased before applying the color.

04-15-2013, 10:44 AM	#11
ithacaartist Twice a Lifer Lifetime Forum Patron Join Date: Mar 2011 Location: Atop the highest hill in Schuyler County NY Posts: 3,323 Thanks: 7,193 Thanked 2,537 Times in 1,350 Posts	Acetone should remove oily residue safely. Consider a soft, natural-bristled brush to clean the tiny depressions, as synthetic bristles--and plastic brushes, as well--tend to dissolve in acetone... __________________ "... Liberty is the seed and soil, the air and light, the dew and rain of progress, love and joy."-- Robert Greene Ingersoll 1894

04-15-2013, 04:24 PM	#12
rhuff Patron LugerForum Patron Join Date: Mar 2011 Location: Az. Posts: 2,288 Thanks: 2,702 Thanked 971 Times in 716 Posts	I have had good luck with lacquer thinner and Q-tips for degreasing. There are other solutions like 91% alcohol, acetone, MEK, etc. I keep lacquer thinner in my shop all the time, so it is what I reach for first.