41 BYF safety lettering

raindog · 06-09-2012, 10:39 PM

I have a 41 BYF "Black Widow" with the original finish intact, and there seems to be no trace of the GESICHERT lettering having ever been filled with white paint.
My question is, was the lettering originally painted in 41, or was this step skipped for these late model P 08's?

sheepherder · 06-10-2012, 08:20 AM

I can't answer your question...But the wear line for the safety looks suspiciously new...and small...Almost like the pistol had been re-blued (dipped; not buffed)...

Norme · 06-10-2012, 08:36 AM

Hi Steve, The lettering on Mauser Luger safeties was white filled until the end of production in 1942. Your missing paint is probably due to a past cleaning with a solvent. Here's a link to a recent discussion on this issue. As you can see, restoring the original ivory colored paint is no big deal. Regards, Norm

http://forum.lugerforum.com/showthre...testers+enamel

DavidJayUden · 06-10-2012, 09:09 AM

It would be interesting to put it under a mag. glass to search for tiny traces of white paint in the lettering.
dju

raindog · 06-10-2012, 01:15 PM

Quote:

Originally Posted by Norme

Hi Steve, The lettering on Mauser Luger safeties was white filled until the end of production in 1942. Your missing paint is probably due to a past cleaning with a solvent. Here's a link to a recent discussion on this issue. As you can see, restoring the original ivory colored paint is no big deal. Regards, Norm

http://forum.lugerforum.com/showthre...testers+enamel

Thanks Norme, I had seen that thread, but wanted to make certain that the lettering was inlaid in white in the first place, before I restored it. I have seen pictures of "original" byf 41 Lugers with and without white lettering and this led me to wonder if they began to cut corners in the later years.

Steve.

raindog · 06-10-2012, 02:15 PM

Attachment 26946

Quote:

Originally Posted by postino

I can't answer your question...But the wear line for the safety looks suspiciously new...and small...Almost like the pistol had been re-blued (dipped; not buffed)...

I had the same suspicion at first glance, but when you have the pistol in your hand, the finish looks original. There is holster wear on the high points as expected and the trigger lever and S link on the toggle are in white as they should be. The muzzle crown also appears to not have been blued either and there are no VOPO markings anywhere on the pistol. I am no expert, however, so it is possible I am being deceived.

Here is an overall image, please ignore the blue cast on some surfaces - probably a function of the white balance being off and light reflection on surface lubricant. The finish is uniform to the naked eye.

alanint · 06-10-2012, 02:25 PM

The gun looks entirely correct to me.

Congratulations!

raindog · 06-10-2012, 03:16 PM

Thanks, it was an impulse buy at a gunshow last year. It was all matching except for a missing hold open. The bore is a bit rough, but the overall appearance was right, so I decided to pick it up after a little negotiation.

DavidJayUden · 06-10-2012, 04:54 PM

I assume that the takedown lever is also blued?
dju

raindog · 06-10-2012, 05:26 PM

Yes, it is. Light is just being reflected off the blued surface.

06-09-2012, 10:39 PM	#1
raindog User Join Date: Mar 2011 Location: West Coast Canada Posts: 10 Thanks: 1 Thanked 1 Time in 1 Post	41 BYF safety lettering I have a 41 BYF "Black Widow" with the original finish intact, and there seems to be no trace of the GESICHERT lettering having ever been filled with white paint. My question is, was the lettering originally painted in 41, or was this step skipped for these late model P 08's? Attached Thumbnails

06-10-2012, 08:20 AM	#2
sheepherder Lifer Lifetime Forum Patron Join Date: Feb 2009 Location: ...on the 'ol Erie Canal... Posts: 8,182 Thanks: 1,398 Thanked 4,440 Times in 2,328 Posts	I can't answer your question...But the wear line for the safety looks suspiciously new...and small...Almost like the pistol had been re-blued (dipped; not buffed)... __________________ I like my coffee the way I like my women... ...Cold and bitter...

06-10-2012, 08:36 AM	#3
Norme Always A Lifetime Forum Patron Join Date: Jul 2009 Location: Colorado Posts: 2,415 Thanks: 225 Thanked 2,594 Times in 931 Posts	Hi Steve, The lettering on Mauser Luger safeties was white filled until the end of production in 1942. Your missing paint is probably due to a past cleaning with a solvent. Here's a link to a recent discussion on this issue. As you can see, restoring the original ivory colored paint is no big deal. Regards, Norm http://forum.lugerforum.com/showthre...testers+enamel

06-10-2012, 09:09 AM	#4
DavidJayUden Patron LugerForum Patron Join Date: Nov 2008 Posts: 4,047 Thanks: 578 Thanked 1,414 Times in 887 Posts	It would be interesting to put it under a mag. glass to search for tiny traces of white paint in the lettering. dju

06-10-2012, 02:25 PM	#7
alanint User Join Date: Mar 2008 Location: Marco Island, Florida Posts: 4,867 Thanks: 1,685 Thanked 1,916 Times in 1,192 Posts	The gun looks entirely correct to me. Congratulations!

06-10-2012, 03:16 PM	#8
raindog User Join Date: Mar 2011 Location: West Coast Canada Posts: 10 Thanks: 1 Thanked 1 Time in 1 Post	Thanks, it was an impulse buy at a gunshow last year. It was all matching except for a missing hold open. The bore is a bit rough, but the overall appearance was right, so I decided to pick it up after a little negotiation.

06-10-2012, 04:54 PM	#9
DavidJayUden Patron LugerForum Patron Join Date: Nov 2008 Posts: 4,047 Thanks: 578 Thanked 1,414 Times in 887 Posts	I assume that the takedown lever is also blued? dju

06-10-2012, 05:26 PM	#10
raindog User Join Date: Mar 2011 Location: West Coast Canada Posts: 10 Thanks: 1 Thanked 1 Time in 1 Post	Yes, it is. Light is just being reflected off the blued surface.