Information of the Cz 33? Please

coto129 · 04-21-2010, 04:23 PM

Hello, they have offered me to buy a Cz 33 and I do not know the pistol and neither I have images.
Has someone information of this pistol?
Thank you very much
Regards

alanint · 04-21-2010, 07:38 PM

Antonio,

I have never heard of a CZ33. I have owned a CZ 38, which may be what they are referring to. It is a very odd pistol, which is hinged at the front and the entire upper assembly tips up to disassemble. This is the only CZ pistol I know of with a 1930's designation. Mine was in .380 ACP, (9mm Kurtz)

http://www.tague.at/pistolen/en_inde...es/en_cz38.htm

coto129 · 04-22-2010, 05:38 AM

La verdad es que me han dicho que se trata de una CZ 33, pero no tenias ninguna marca.
No encuentro nada en Internet sobre esta pistola.Only I have seen a photo in Internet in a so called shop " militaria barcelona ".

Sending a few photos that they me have sent

alanint · 04-22-2010, 08:57 AM

ANtonio,
I'm not sure what it is but it is not a CZ. The quality is too low. I will see if my resources can identify it for you.

"Antonio,
No estoy seguro que es lo que es pero no es una CZ. La calidad es demasiado baja. Buscare en mis archivos y preguntare entre amigos para ver si te la podemos identificar.

Saludos,
DougA

coto129 · 04-22-2010, 11:00 AM

Thank you very much for your interest and help.
Certainly the calibre is 7,65
Regards Antonio

Curly1 · 04-22-2010, 11:39 AM

Kinda looks like this guy.

http://www.handgunsoftheworld.com/ca...44/7003257.htm

John Sabato · 04-22-2010, 11:49 AM

Definitely not a DWM product Gary... Looks Chinese or Eastern Bloc made to me... and somewhat resembles the design used for the CZ52... or possibly Tokarev in origin only much cruder and smaller.

coto129 · 04-22-2010, 12:55 PM

The marks are : ZBROJOVKA PRAGA

PRAHA
It is obvious dat is Czech

alanint · 04-22-2010, 01:25 PM

"Ceska Zbrojovka" is the denomination for the "CZ" in the original pistols. If they spelled Prague "Praga", then that is the Spanish spelling for Prague and would not be spelled this way on a real CZ.
What I believe you have is a copy someone wanted to make look like a CZ, much like the Smith and Wesson revolvers, which were made in Spain prior to World War 2, which copied the S&W logo and trademarks.
This pistol is a crude attempt to copy a known trademark, in my opinion and is not worth purchasing.

coto129 · 04-22-2010, 01:37 PM

I also think it is not an original Cz

04-21-2010, 04:23 PM	#1
coto129 User Join Date: Apr 2010 Location: Sevilla (ESPAÑA) Posts: 82 Thanks: 4 Thanked 0 Times in 0 Posts	Information of the Cz 33? Please Hello, they have offered me to buy a Cz 33 and I do not know the pistol and neither I have images. Has someone information of this pistol? Thank you very much Regards __________________ THERE IS NO IN THE WORLD LAND, WHICH DOES NOT HAVE SPANISH TOMB

04-22-2010, 05:38 AM	#3
coto129 User Join Date: Apr 2010 Location: Sevilla (ESPAÑA) Posts: 82 Thanks: 4 Thanked 0 Times in 0 Posts	La verdad es que me han dicho que se trata de una CZ 33, pero no tenias ninguna marca. No encuentro nada en Internet sobre esta pistola.Only I have seen a photo in Internet in a so called shop " militaria barcelona ". Sending a few photos that they me have sent Attached Thumbnails __________________ THERE IS NO IN THE WORLD LAND, WHICH DOES NOT HAVE SPANISH TOMB

04-22-2010, 11:00 AM	#5
coto129 User Join Date: Apr 2010 Location: Sevilla (ESPAÑA) Posts: 82 Thanks: 4 Thanked 0 Times in 0 Posts	Thank you very much for your interest and help. Certainly the calibre is 7,65 Regards Antonio __________________ THERE IS NO IN THE WORLD LAND, WHICH DOES NOT HAVE SPANISH TOMB

04-22-2010, 11:39 AM	#6
Curly1 User Join Date: Oct 2005 Location: Upstate New York Posts: 1,244 Thanks: 125 Thanked 715 Times in 372 Posts	Kinda looks like this guy. http://www.handgunsoftheworld.com/ca...44/7003257.htm __________________ Laugh hard and often. Gary

04-22-2010, 11:49 AM	#7
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,155 Thanks: 3,003 Thanked 2,308 Times in 1,098 Posts	Definitely not a DWM product Gary... Looks Chinese or Eastern Bloc made to me... and somewhat resembles the design used for the CZ52... or possibly Tokarev in origin only much cruder and smaller. __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

04-21-2010, 07:38 PM	#2
alanint User Join Date: Mar 2008 Location: Marco Island, Florida Posts: 4,867 Thanks: 1,685 Thanked 1,917 Times in 1,193 Posts	Antonio, I have never heard of a CZ33. I have owned a CZ 38, which may be what they are referring to. It is a very odd pistol, which is hinged at the front and the entire upper assembly tips up to disassemble. This is the only CZ pistol I know of with a 1930's designation. Mine was in .380 ACP, (9mm Kurtz) http://www.tague.at/pistolen/en_inde...es/en_cz38.htm

04-22-2010, 08:57 AM	#4
alanint User Join Date: Mar 2008 Location: Marco Island, Florida Posts: 4,867 Thanks: 1,685 Thanked 1,917 Times in 1,193 Posts	ANtonio, I'm not sure what it is but it is not a CZ. The quality is too low. I will see if my resources can identify it for you. "Antonio, No estoy seguro que es lo que es pero no es una CZ. La calidad es demasiado baja. Buscare en mis archivos y preguntare entre amigos para ver si te la podemos identificar. Saludos, DougA

04-22-2010, 12:55 PM	#8
coto129 User Join Date: Apr 2010 Location: Sevilla (ESPAÑA) Posts: 82 Thanks: 4 Thanked 0 Times in 0 Posts	The marks are : ZBROJOVKA PRAGA PRAHA It is obvious dat is Czech __________________ THERE IS NO IN THE WORLD LAND, WHICH DOES NOT HAVE SPANISH TOMB

04-22-2010, 01:25 PM	#9
alanint User Join Date: Mar 2008 Location: Marco Island, Florida Posts: 4,867 Thanks: 1,685 Thanked 1,917 Times in 1,193 Posts	"Ceska Zbrojovka" is the denomination for the "CZ" in the original pistols. If they spelled Prague "Praga", then that is the Spanish spelling for Prague and would not be spelled this way on a real CZ. What I believe you have is a copy someone wanted to make look like a CZ, much like the Smith and Wesson revolvers, which were made in Spain prior to World War 2, which copied the S&W logo and trademarks. This pistol is a crude attempt to copy a known trademark, in my opinion and is not worth purchasing.

04-22-2010, 01:37 PM	#10
coto129 User Join Date: Apr 2010 Location: Sevilla (ESPAÑA) Posts: 82 Thanks: 4 Thanked 0 Times in 0 Posts	I also think it is not an original Cz __________________ THERE IS NO IN THE WORLD LAND, WHICH DOES NOT HAVE SPANISH TOMB