Sear? problem

sfnamvet · 05-12-2009, 09:57 AM

I am trying to diagnose a problem a friend of mine has, at long distance. He says that has has a nice P08 luger but the sear does not release the firing pin. I don't have a Luger here to look at but from the parts diagram that I have, I do not see a sear. Any ideas as to what may be holding the firing pin?

Thanks

John

alanint · 05-12-2009, 10:18 AM

The sear is the spring loaded bar that rests longitudenaly along the left side of the upper "cannon" of the Luger.
Have your friend strip the gun and keep the entire upper cannon together, that is with complete toggle and bolt in the upper. Have him raise and lower the toggle to "****" the upper. There should be some slight resistance from the toggle upon lowering, which indicates the firing pin is being held back.
On an empty chamber, have him press the muzzle end of this bar on the left side of the upper in with one of his thumbs. If he hears a "click" then the firing pin has just been released. If he gets both the toggle resistance upon closing and the click when applying pressure to the sear bar, at least superficially these would appear to be working correctly.
The problem would then most likely lie with the transfer baror trigger.

sfnamvet · 05-12-2009, 07:35 PM

Thanks for the info, I will pass it on to him. What is the word between toggle to*******the upper? All I got were "*"*"*

alanint · 05-12-2009, 10:09 PM

Don't know what happened there I suppose it "on" would make sense there

John Sabato · 05-13-2009, 11:43 AM

I think the missing word is a four letter english word for making the gun ready to fire... the act of cocking... which might have been filtered by the forum software... even I as a super moderator couldn't edit it to read correctly! Evidently the Present Perfect form of the the verb passes the filter!

policeluger · 05-13-2009, 12:29 PM

Can we call it rooster ?

John Sabato · 05-13-2009, 01:56 PM

Good one Howard!

alanint · 05-13-2009, 03:11 PM

How about the French "coque"?

John Sabato · 05-13-2009, 03:47 PM

okay guys... that's enough

before the innuendo's get out of hand and I have to nuke the thread

.

I was just offering the reason the text didn't show.

05-12-2009, 09:57 AM	#1
sfnamvet User Join Date: May 2009 Posts: 12 Thanks: 0 Thanked 0 Times in 0 Posts	Sear? problem I am trying to diagnose a problem a friend of mine has, at long distance. He says that has has a nice P08 luger but the sear does not release the firing pin. I don't have a Luger here to look at but from the parts diagram that I have, I do not see a sear. Any ideas as to what may be holding the firing pin? Thanks John

05-13-2009, 11:43 AM	#5
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,156 Thanks: 3,003 Thanked 2,308 Times in 1,098 Posts	I think the missing word is a four letter english word for making the gun ready to fire... the act of cocking... which might have been filtered by the forum software... even I as a super moderator couldn't edit it to read correctly! Evidently the Present Perfect form of the the verb passes the filter! __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

05-13-2009, 01:56 PM	#7
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,156 Thanks: 3,003 Thanked 2,308 Times in 1,098 Posts	Good one Howard! __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

05-13-2009, 03:47 PM	#9
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,156 Thanks: 3,003 Thanked 2,308 Times in 1,098 Posts	okay guys... that's enough before the innuendo's get out of hand and I have to nuke the thread . I was just offering the reason the text didn't show. __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

05-12-2009, 10:18 AM	#2
alanint User Join Date: Mar 2008 Location: Marco Island, Florida Posts: 4,867 Thanks: 1,685 Thanked 1,917 Times in 1,193 Posts	The sear is the spring loaded bar that rests longitudenaly along the left side of the upper "cannon" of the Luger. Have your friend strip the gun and keep the entire upper cannon together, that is with complete toggle and bolt in the upper. Have him raise and lower the toggle to "****" the upper. There should be some slight resistance from the toggle upon lowering, which indicates the firing pin is being held back. On an empty chamber, have him press the muzzle end of this bar on the left side of the upper in with one of his thumbs. If he hears a "click" then the firing pin has just been released. If he gets both the toggle resistance upon closing and the click when applying pressure to the sear bar, at least superficially these would appear to be working correctly. The problem would then most likely lie with the transfer baror trigger.

05-12-2009, 07:35 PM	#3
sfnamvet User Join Date: May 2009 Posts: 12 Thanks: 0 Thanked 0 Times in 0 Posts	Thanks for the info, I will pass it on to him. What is the word between toggle to******the upper? All I got were """

05-12-2009, 10:09 PM	#4
alanint User Join Date: Mar 2008 Location: Marco Island, Florida Posts: 4,867 Thanks: 1,685 Thanked 1,917 Times in 1,193 Posts	Don't know what happened there I suppose it "on" would make sense there

05-13-2009, 12:29 PM	#6
policeluger RIP Join Date: Jun 2002 Location: Ca. Posts: 2,141 Thanks: 8 Thanked 89 Times in 54 Posts	Can we call it rooster ?

05-13-2009, 03:11 PM	#8
alanint User Join Date: Mar 2008 Location: Marco Island, Florida Posts: 4,867 Thanks: 1,685 Thanked 1,917 Times in 1,193 Posts	How about the French "coque"?