Arty Repro Boards *pictures added*

stefanosg · 01-16-2007, 05:08 PM

Numrich seems to have in stock the reproduction boards and hdwr for the arty's. I got mine on Friday and had a chance over the weekend to use it. I was pleased with it. The fit is good and there was no wiggle between the gun and the board.

stefanosg · 01-23-2007, 08:56 PM

Added some picts today

thegundude · 01-23-2007, 09:02 PM

Steve, I ordered mine yesterday and I jsut got an email saying it's shipped. I decided to get the cheap holster set-up too, just for the heck of it.

The stock looks nice. I can't wait to try it out.

stefanosg · 01-23-2007, 09:32 PM

Let me know how the holster is. I have a birthday next month and its not too late to add it to my list.

thegundude · 01-23-2007, 09:43 PM

Will do, Steven...

thegundude · 01-25-2007, 04:41 PM

Yo man. I got the stock and holster today and I'm very happy with it. It's not what I'd call "top-of-the-line" but it'll get the job done for $45.

It doesn't come with the stuff to attach the holster and stock together though. I'm going to have to get in touch with Jerry for that, I guess.

I noticed that the latch doesn't close all the way on the stock. It gets about 4/5th of the way there and stops. It closes all the way off the gun but not on the gun.

I'll see if I can locate the charger for my camera battery and take some pictures. All in all, I'm very satisfied with the outcome.

stefanosg · 01-25-2007, 08:33 PM

I noticed on mine, that when you first slide it on you need to press down on the lever a bit. If you look at the close up of the lever I posted, it is angled slightly upward(The pic is upside down). Press down on it a bit while sliding the stock on. There is a wee bit of play there, but it flattens out that side of the locking mechanism enough to allow it to slide all the way up properly. You may not be all the way up the back of the lug and that is why it wont close all the way. It seems easier to do now that I have done it a dozen or so times. Some of the edges may bit rough until broken in a bit by use.

thegundude · 01-25-2007, 11:15 PM

You know, I tried it on some of my other Lugers and it fits differently on all of them. The only one it fits perfectly on is the 1939 Nazi Mauser. It's sloppy as heck on the 1917 Erfurt shooter...

I was looking at the lug and I think it could stand to have just a hair taken out of the notch. I'm not going to go and grind on it, but that's clearly what it needs.

I took a look at the picture and description from Numrich on that holster. It is supposed to come with a mag pouch and straps, but it has neither. I'm going to call them tomorrow.

Fray Bentos · 01-30-2007, 04:22 PM

Do you have a part number?
I can't find it on the website.

stefanosg · 01-30-2007, 05:03 PM

It is Item No. 701250 or you can try this link.

http://www.e-gunparts.com/DisplayAd....SKU=726270&MC=

thegundude · 01-30-2007, 10:12 PM

And if you want to check out the holster click on the link.

Artillery holster

I got mine and I'm very happy with it. For $45, you can't beat it.

01-16-2007, 05:08 PM	#1
stefanosg User Join Date: Jan 2006 Location: East Central Florida Posts: 367 Thanks: 1 Thanked 7 Times in 2 Posts	Arty Repro Boards pictures added Numrich seems to have in stock the reproduction boards and hdwr for the arty's. I got mine on Friday and had a chance over the weekend to use it. I was pleased with it. The fit is good and there was no wiggle between the gun and the board. __________________ "When the people fear their government, there is tyranny; when the government fears the people, there is liberty."

01-23-2007, 08:56 PM	#2
stefanosg User Join Date: Jan 2006 Location: East Central Florida Posts: 367 Thanks: 1 Thanked 7 Times in 2 Posts	Added some picts today __________________ "When the people fear their government, there is tyranny; when the government fears the people, there is liberty."

01-23-2007, 09:02 PM	#3
thegundude User Join Date: Jan 2005 Location: Western NC Posts: 1,137 Thanks: 3 Thanked 16 Times in 3 Posts	Steve, I ordered mine yesterday and I jsut got an email saying it's shipped. I decided to get the cheap holster set-up too, just for the heck of it. The stock looks nice. I can't wait to try it out. __________________ Keep your knees in the breeze and your iron in the air. ~Steve

01-23-2007, 09:32 PM	#4
stefanosg User Join Date: Jan 2006 Location: East Central Florida Posts: 367 Thanks: 1 Thanked 7 Times in 2 Posts	Let me know how the holster is. I have a birthday next month and its not too late to add it to my list. __________________ "When the people fear their government, there is tyranny; when the government fears the people, there is liberty."

01-23-2007, 09:43 PM	#5
thegundude User Join Date: Jan 2005 Location: Western NC Posts: 1,137 Thanks: 3 Thanked 16 Times in 3 Posts	Will do, Steven... __________________ Keep your knees in the breeze and your iron in the air. ~Steve

01-25-2007, 04:41 PM	#6
thegundude User Join Date: Jan 2005 Location: Western NC Posts: 1,137 Thanks: 3 Thanked 16 Times in 3 Posts	Yo man. I got the stock and holster today and I'm very happy with it. It's not what I'd call "top-of-the-line" but it'll get the job done for $45. It doesn't come with the stuff to attach the holster and stock together though. I'm going to have to get in touch with Jerry for that, I guess. I noticed that the latch doesn't close all the way on the stock. It gets about 4/5th of the way there and stops. It closes all the way off the gun but not on the gun. I'll see if I can locate the charger for my camera battery and take some pictures. All in all, I'm very satisfied with the outcome. __________________ Keep your knees in the breeze and your iron in the air. ~Steve

01-25-2007, 08:33 PM	#7
stefanosg User Join Date: Jan 2006 Location: East Central Florida Posts: 367 Thanks: 1 Thanked 7 Times in 2 Posts	I noticed on mine, that when you first slide it on you need to press down on the lever a bit. If you look at the close up of the lever I posted, it is angled slightly upward(The pic is upside down). Press down on it a bit while sliding the stock on. There is a wee bit of play there, but it flattens out that side of the locking mechanism enough to allow it to slide all the way up properly. You may not be all the way up the back of the lug and that is why it wont close all the way. It seems easier to do now that I have done it a dozen or so times. Some of the edges may bit rough until broken in a bit by use. __________________ "When the people fear their government, there is tyranny; when the government fears the people, there is liberty."

01-25-2007, 11:15 PM	#8
thegundude User Join Date: Jan 2005 Location: Western NC Posts: 1,137 Thanks: 3 Thanked 16 Times in 3 Posts	You know, I tried it on some of my other Lugers and it fits differently on all of them. The only one it fits perfectly on is the 1939 Nazi Mauser. It's sloppy as heck on the 1917 Erfurt shooter... I was looking at the lug and I think it could stand to have just a hair taken out of the notch. I'm not going to go and grind on it, but that's clearly what it needs. I took a look at the picture and description from Numrich on that holster. It is supposed to come with a mag pouch and straps, but it has neither. I'm going to call them tomorrow. __________________ Keep your knees in the breeze and your iron in the air. ~Steve

01-30-2007, 04:22 PM	#9
Fray Bentos User Join Date: Jan 2005 Location: SW Florida Posts: 10 Thanks: 0 Thanked 0 Times in 0 Posts	Do you have a part number? I can't find it on the website.

01-30-2007, 05:03 PM	#10
stefanosg User Join Date: Jan 2006 Location: East Central Florida Posts: 367 Thanks: 1 Thanked 7 Times in 2 Posts	It is Item No. 701250 or you can try this link. http://www.e-gunparts.com/DisplayAd....SKU=726270&MC= __________________ "When the people fear their government, there is tyranny; when the government fears the people, there is liberty."

01-30-2007, 10:12 PM	#11
thegundude User Join Date: Jan 2005 Location: Western NC Posts: 1,137 Thanks: 3 Thanked 16 Times in 3 Posts	And if you want to check out the holster click on the link. Artillery holster I got mine and I'm very happy with it. For $45, you can't beat it. __________________ Keep your knees in the breeze and your iron in the air. ~Steve