Holster question

Judge Fox · 08-26-2023, 06:14 PM

Acquired this holster last week at a local gun show. Quite solid condition, appears original finish is black, well-made, utterly unmarked, size for 4-inch barrel Luger. All metal is brass. What is it? My uneducated guess is Portuguese, but what do I know. Meant to be suspended from the strap without provision for a shoulder stock? Thanks for your help.

lugerholsterrepair · 08-27-2023, 02:29 PM

Portuguese

Ben M. · 08-28-2023, 10:26 PM

4-3/4" barrel, also

Judge Fox · 08-30-2023, 12:04 AM

Query: is this particular rig supposed to go with a wooden stock, like friend Burney's, shown above? It has a buckle on the end of one of the suspension straps, which I illustrated, that doesn't seen to navigate through the slots in the wood.

lugerholsterrepair · 08-30-2023, 12:53 AM

No Sir. This holster cannot be nor was it ever intended to be attached to a stock. It was sans stock and meant to be worn withe the strap across the shoulder. No provision for a stock. No way to attach one.

MFC · 09-01-2023, 01:44 AM

I have been seeing these rigs at shows and on the web for several years. They all have a mag pouch that is too short for Luger magazines. No one seems to know why.

My no count, dumb a$$ theory is that these were intended to go to the Portuguese Navy. The Portuguese Navy Lugers have 4" barrels, and the holsters were worn with shoulder straps. Except for the straps, the holsters on these rigs are exactly the same as the M2 holsters which are made for 4 3/4" barrels. The holster should be 3/4" shorter, NOT the mag pouch. Someone got the directive wrong and probably had a shortened career. There are no arsenal or acceptance stamps because the Navy didn't accept them, and subsequently they were sold on the commercial market.

lugerholsterrepair · 09-01-2023, 11:25 AM

They all have a mag pouch that is too short for Luger magazines. No one seems to know why. I sure don't cause what could they be for?

reiver · 09-01-2023, 01:39 PM

MFC, that's as good an explanation as any....

Vlim · 09-01-2023, 04:26 PM

Hmm. I have a LP08 style double mag pouch that takes P38 mags perfectly. Could these actually be P38 holsters?

A bit weird with a tool pouch. But try a P38 mag?

lugerholsterrepair · 09-01-2023, 08:12 PM

My no count, dumb a$$ theory is that these were intended to go to the Portuguese Navy.

OK let's say this is true..did the Portuguese Navy use WAY short Luger mags?

MFC · 09-02-2023, 12:23 AM

Quote:

Originally Posted by lugerholsterrepair

My no count, dumb a$$ theory is that these were intended to go to the Portuguese Navy.

OK let's say this is true..did the Portuguese Navy use WAY short Luger mags?

No. I said they were supposed to shorten the holster by 3/4"... not the mag pouch (someone screwed up). If the holster were shortened instead of the mag pouch, it would be perfect for a Navy rig.

I'm not sure but I think the pouch is too short for a P-38 mag also.

reiver · 09-02-2023, 01:14 AM

Gee, I've never heard of military contractors making a mistake (lmfao)

08-26-2023, 06:14 PM	#1
Judge Fox New User Join Date: Aug 2023 Location: Hendersonville, N.C. Posts: 4 Thanks: 0 Thanked 8 Times in 4 Posts	Holster question Acquired this holster last week at a local gun show. Quite solid condition, appears original finish is black, well-made, utterly unmarked, size for 4-inch barrel Luger. All metal is brass. What is it? My uneducated guess is Portuguese, but what do I know. Meant to be suspended from the strap without provision for a shoulder stock? Thanks for your help. Attached Thumbnails

08-27-2023, 02:29 PM	#2
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,771 Thanks: 4,931 Thanked 3,124 Times in 1,434 Posts	Portuguese __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."

08-30-2023, 12:53 AM	#5
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,771 Thanks: 4,931 Thanked 3,124 Times in 1,434 Posts	No Sir. This holster cannot be nor was it ever intended to be attached to a stock. It was sans stock and meant to be worn withe the strap across the shoulder. No provision for a stock. No way to attach one. __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."

09-01-2023, 01:44 AM	#6
MFC User Join Date: Sep 2006 Location: Louisiana Posts: 1,237 Thanks: 183 Thanked 281 Times in 162 Posts	I have been seeing these rigs at shows and on the web for several years. They all have a mag pouch that is too short for Luger magazines. No one seems to know why. My no count, dumb a$$ theory is that these were intended to go to the Portuguese Navy. The Portuguese Navy Lugers have 4" barrels, and the holsters were worn with shoulder straps. Except for the straps, the holsters on these rigs are exactly the same as the M2 holsters which are made for 4 3/4" barrels. The holster should be 3/4" shorter, NOT the mag pouch. Someone got the directive wrong and probably had a shortened career. There are no arsenal or acceptance stamps because the Navy didn't accept them, and subsequently they were sold on the commercial market. __________________ Mike C. Last edited by MFC; 09-01-2023 at 02:47 AM.

09-01-2023, 11:25 AM	#7
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,771 Thanks: 4,931 Thanked 3,124 Times in 1,434 Posts	They all have a mag pouch that is too short for Luger magazines. No one seems to know why. I sure don't cause what could they be for? __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."

08-28-2023, 10:26 PM	#3
Ben M. User Join Date: Dec 2009 Location: Retired to Naples, FL. Posts: 488 Thanks: 90 Thanked 123 Times in 83 Posts	4-3/4" barrel, also

08-30-2023, 12:04 AM	#4
Judge Fox New User Join Date: Aug 2023 Location: Hendersonville, N.C. Posts: 4 Thanks: 0 Thanked 8 Times in 4 Posts	Query: is this particular rig supposed to go with a wooden stock, like friend Burney's, shown above? It has a buckle on the end of one of the suspension straps, which I illustrated, that doesn't seen to navigate through the slots in the wood.

09-01-2023, 01:39 PM	#8
reiver User Join Date: Feb 2023 Posts: 132 Thanks: 81 Thanked 149 Times in 63 Posts	MFC, that's as good an explanation as any....

09-01-2023, 04:26 PM	#9
Vlim Moderator Lifetime LugerForum Patron Join Date: Oct 2002 Location: Europe Posts: 5,053 Thanks: 1,036 Thanked 3,988 Times in 1,205 Posts	Hmm. I have a LP08 style double mag pouch that takes P38 mags perfectly. Could these actually be P38 holsters? A bit weird with a tool pouch. But try a P38 mag?

09-01-2023, 08:12 PM	#10
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,771 Thanks: 4,931 Thanked 3,124 Times in 1,434 Posts	My no count, dumb a$$ theory is that these were intended to go to the Portuguese Navy. OK let's say this is true..did the Portuguese Navy use WAY short Luger mags? __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."

09-02-2023, 01:14 AM	#12
reiver User Join Date: Feb 2023 Posts: 132 Thanks: 81 Thanked 149 Times in 63 Posts	Gee, I've never heard of military contractors making a mistake (lmfao)