1918 luger and loading drum

Detroit-1 · 05-19-2021, 11:54 AM

A friend has this. What can you guys tell him about it.

Detroit-1 · 05-19-2021, 11:59 AM

More

Detroit-1 · 05-19-2021, 12:05 PM

Pictures

lugerholsterrepair · 05-19-2021, 12:31 PM

The Artillery pistol is a mixed bag of commercial and military parts. Is there any kind of serial number on the underside of the barrel? There is none on the front of the frame and their should be. It has either been removed or was never put on. I ain't no lawyer but this may put this pistol in a questionable legal status. The pistol has GERMANY stamped along the left side rail. It was likely imported into the USA during the mid 20's.

Does the stock iron have any serial number in the metal? The stock looks original and consistent with the pistol. Does the stock slip on and lock onto the pistol?

Detroit-1 · 05-19-2021, 01:01 PM

I did not see any serial numbers on the gun. Yes the stock goes on.

Detroit-1 · 05-19-2021, 01:05 PM

What about the the drum and tools? Original?

lugerholsterrepair · 05-19-2021, 01:11 PM

Yes, Both look original.

Ron Wood · 05-19-2021, 02:27 PM

That AEG loader is a choice item.
Ron

gunnertwo · 05-19-2021, 04:03 PM

The frame should have a serial number. It doesn't look refinished and the frame and toggle train match in alignment. So, it's a mystery that remains to be resolved. Don't worry about the serial number as there was not a requirement to have one until the 1968 Gun Control Act. Removal of a serial number is illegal if done for an unlawful act. Is the stock numbered? I agree with Ron, the trommel mag and loader are nice.

G2

lugerholsterrepair · 05-19-2021, 04:30 PM

Don't worry about the serial number as there was not a requirement to have one until the 1968 Gun Control Act. Removal of a serial number is illegal if done for an unlawful act.

Again, I stress "problematicle" How does one log in a pistol with no serial? How does one report it stolen? Who can say if it was "removed" in an unlawful act? Who can explain if it was removed or never put on? How do you run it through a data base of guns reported stolen?

No matter what can or cannot be said about it..it ain't there and it's not a pistol I would be interested in just because it ain't there. Givin the lunkheads in the ATF it could be percieved enough of a problem to invite scrutiny and employment of a defense lawyer to explain away what we know but they don't. Just sayin.

gunnertwo · 05-19-2021, 04:39 PM

What Jerry said is correct. It should have a number and there are issues related to that fact. But there were thousands of firearms made without serial numbers prior to 1968. They were put into dealers books as NSN, and were put through the NICS checks as NSN. It just depends on who wants to make it an issue. Unfortunately, a nice gun that was ruined by not having the serial.

G2

ithacaartist · 05-20-2021, 02:30 AM

Here's an idea. The front of the frame below the barrel where the serial number once was looks severely ground down to me...so much, in fact, that I suspect this Franken-artillery may have been slapped together on an early long frame that was ground to be flush with the upper. One thing's certain--the frame never left the factory like that. Moreover it had to have been refinished at some point to cover up the grinding. All re-blues are not equal, and sometimes it's hard to spot a vintage replacement finish. And finally, the receiver doesn't appear in the close-up or that area to have been relieved to allow the lowest position of the rear sight.

05-19-2021, 11:54 AM	#1
Detroit-1 User Join Date: May 2019 Posts: 11 Thanks: 5 Thanked 1 Time in 1 Post	1918 luger and loading drum A friend has this. What can you guys tell him about it. Attached Thumbnails

05-19-2021, 11:59 AM	#2
Detroit-1 User Join Date: May 2019 Posts: 11 Thanks: 5 Thanked 1 Time in 1 Post	More Attached Thumbnails

05-19-2021, 12:05 PM	#3
Detroit-1 User Join Date: May 2019 Posts: 11 Thanks: 5 Thanked 1 Time in 1 Post	Pictures Attached Thumbnails

05-19-2021, 12:31 PM	#4
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,772 Thanks: 4,933 Thanked 3,124 Times in 1,434 Posts	The Artillery pistol is a mixed bag of commercial and military parts. Is there any kind of serial number on the underside of the barrel? There is none on the front of the frame and their should be. It has either been removed or was never put on. I ain't no lawyer but this may put this pistol in a questionable legal status. The pistol has GERMANY stamped along the left side rail. It was likely imported into the USA during the mid 20's. Does the stock iron have any serial number in the metal? The stock looks original and consistent with the pistol. Does the stock slip on and lock onto the pistol? __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."

05-19-2021, 01:11 PM	#7
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,772 Thanks: 4,933 Thanked 3,124 Times in 1,434 Posts	Yes, Both look original. __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."

05-19-2021, 01:01 PM	#5
Detroit-1 User Join Date: May 2019 Posts: 11 Thanks: 5 Thanked 1 Time in 1 Post	I did not see any serial numbers on the gun. Yes the stock goes on.

05-19-2021, 01:05 PM	#6
Detroit-1 User Join Date: May 2019 Posts: 11 Thanks: 5 Thanked 1 Time in 1 Post	What about the the drum and tools? Original?

05-19-2021, 02:27 PM	#8
Ron Wood Moderator 2010 LugerForum Patron Join Date: Jun 2002 Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso Posts: 7,022 Thanks: 1,090 Thanked 5,178 Times in 1,703 Posts	That AEG loader is a choice item. Ron __________________ If it's made after 1918...it's a reproduction

05-19-2021, 04:03 PM	#9
gunnertwo User Join Date: Jan 2010 Location: Nampa, Idaho Posts: 623 Thanks: 826 Thanked 930 Times in 363 Posts	The frame should have a serial number. It doesn't look refinished and the frame and toggle train match in alignment. So, it's a mystery that remains to be resolved. Don't worry about the serial number as there was not a requirement to have one until the 1968 Gun Control Act. Removal of a serial number is illegal if done for an unlawful act. Is the stock numbered? I agree with Ron, the trommel mag and loader are nice. G2

05-19-2021, 04:30 PM	#10
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,772 Thanks: 4,933 Thanked 3,124 Times in 1,434 Posts	Don't worry about the serial number as there was not a requirement to have one until the 1968 Gun Control Act. Removal of a serial number is illegal if done for an unlawful act. Again, I stress "problematicle" How does one log in a pistol with no serial? How does one report it stolen? Who can say if it was "removed" in an unlawful act? Who can explain if it was removed or never put on? How do you run it through a data base of guns reported stolen? No matter what can or cannot be said about it..it ain't there and it's not a pistol I would be interested in just because it ain't there. Givin the lunkheads in the ATF it could be percieved enough of a problem to invite scrutiny and employment of a defense lawyer to explain away what we know but they don't. Just sayin. __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."

05-19-2021, 04:39 PM	#11
gunnertwo User Join Date: Jan 2010 Location: Nampa, Idaho Posts: 623 Thanks: 826 Thanked 930 Times in 363 Posts	What Jerry said is correct. It should have a number and there are issues related to that fact. But there were thousands of firearms made without serial numbers prior to 1968. They were put into dealers books as NSN, and were put through the NICS checks as NSN. It just depends on who wants to make it an issue. Unfortunately, a nice gun that was ruined by not having the serial. G2

05-20-2021, 02:30 AM	#12
ithacaartist Twice a Lifer Lifetime Forum Patron Join Date: Mar 2011 Location: Atop the highest hill in Schuyler County NY Posts: 3,346 Thanks: 7,280 Thanked 2,578 Times in 1,365 Posts	Here's an idea. The front of the frame below the barrel where the serial number once was looks severely ground down to me...so much, in fact, that I suspect this Franken-artillery may have been slapped together on an early long frame that was ground to be flush with the upper. One thing's certain--the frame never left the factory like that. Moreover it had to have been refinished at some point to cover up the grinding. All re-blues are not equal, and sometimes it's hard to spot a vintage replacement finish. And finally, the receiver doesn't appear in the close-up or that area to have been relieved to allow the lowest position of the rear sight. __________________ "... Liberty is the seed and soil, the air and light, the dew and rain of progress, love and joy."-- Robert Greene Ingersoll 1894