LugerForum Discussion Forums my profile | register | faq | search
upload photo | donate | calendar

Go Back   LugerForum Discussion Forums > General Discussion Forums > Shooting and Reloading

Reply
Thread Tools Display Modes
Unread 10-14-2012, 04:30 PM   #1
CoyoteM4
User
 
CoyoteM4's Avatar
 
Join Date: Oct 2012
Location: Ohio
Posts: 30
Thanks: 7
Thanked 3 Times in 3 Posts
Default Luger P-08 9MM - Safest/Cleanest modern production ammo?

Hey everyone, I don't see a sticky on this so I'll just ask. For you guys that shoot your Lugers regularly, is there a certain brand/type of 9MM ammo you prefer. I actually haven't located my Luger yet, so I'm kind of jumping the gun, but it's one of the questions that keep popping into my head.

For range use I used to shoot whatever I could find the cheapest in my Springfield XD 9MM - As far as cheaper stuff goes I've found I like the cheap Federal FMJ best, but it will shoot/feed Tula steel case fine as well. However, it's a modern pistol and not 75 years old.

When I finally get my hands on one, I don't want to feed it garbage that will cause unnecessary ware for something already worn. So I'm all ears for suggestions on modern production ammo that works best for these older pistols.

I might be over-thinking it, but I'm sure you can understand my enthusiasm for knowledge. Also, if this has been beaten to death and I haven't dug far enough into the forum, my apologies.
CoyoteM4 is offline   Reply With Quote
Unread 10-14-2012, 04:40 PM   #2
Edward Tinker
Super Moderator
Eternal Lifer
LugerForum
Patron
 
Edward Tinker's Avatar
 
Join Date: Jun 2002
Location: North of Spokane, WA
Posts: 15,933
Thanks: 2,032
Thanked 4,530 Times in 2,092 Posts
Default

Mike, yes, it does get asked a lot - but it is probably spread here and there

Many folks use Winchester 'white' box, it works well in most lugers

I have some cheaper ammo, called Olympic, and it shoots good but is dirty - wolf ammo is also fairly dirty

Don't use +p or machine pistol ammo / some say that Nato is too powerful

Ed
__________________
Edward Tinker
************
Co-Author of Police Lugers - Co-Author of Simson Lugers
Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

Edward Tinker is offline   Reply With Quote
The following member says Thank You to Edward Tinker for your post:
Unread 10-14-2012, 04:55 PM   #3
CoyoteM4
User
 
CoyoteM4's Avatar
 
Join Date: Oct 2012
Location: Ohio
Posts: 30
Thanks: 7
Thanked 3 Times in 3 Posts
Default

Thanks for the quick reply Edward. I've shot a decent amount of Winnie White Box and I'd say very comparable to the Federal I shoot now. So that's great. I have shot a couple thousand rounds of Wolf and Tula steel case in my AKM and that stuff can be super dirty. I'll definitely avoid it and stick with White Box and Federal.

I could see a preferred ammo sticky with everyone's input as being a great source for new shooters.
CoyoteM4 is offline   Reply With Quote
Unread 10-14-2012, 05:00 PM   #4
Edward Tinker
Super Moderator
Eternal Lifer
LugerForum
Patron
 
Edward Tinker's Avatar
 
Join Date: Jun 2002
Location: North of Spokane, WA
Posts: 15,933
Thanks: 2,032
Thanked 4,530 Times in 2,092 Posts
Default

Quote:
Originally Posted by CoyoteM4 View Post
...

I could see a preferred ammo sticky with everyone's input as being a great source for new shooters.
Lets see what else do we get asked all the time?

Best type of ammo?
Value (too wide based, so no I don't think so)
Grip cleaning (there is a write up on it)
How much does mismatched parts affect value
What uses are the loading tool good for? (i have one on my keyring )


OTHERS?
Edward Tinker is offline   Reply With Quote
Unread 10-14-2012, 05:12 PM   #5
CoyoteM4
User
 
CoyoteM4's Avatar
 
Join Date: Oct 2012
Location: Ohio
Posts: 30
Thanks: 7
Thanked 3 Times in 3 Posts
Default

Quote:
Originally Posted by Edward Tinker View Post
Lets see what else do we get asked all the time?

Best type of ammo?
Value (too wide based, so no I don't think so)
Grip cleaning (there is a write up on it)
How much does mismatched parts affect value
What uses are the loading tool good for? (i have one on my keyring )


OTHERS?
Well now I know what questions to avoid in the future without thorough research first.
CoyoteM4 is offline   Reply With Quote
Unread 10-14-2012, 05:36 PM   #6
rhuff
Patron
LugerForum
Patron
 
rhuff's Avatar
 
Join Date: Mar 2011
Location: Az.
Posts: 2,291
Thanks: 2,709
Thanked 972 Times in 717 Posts
Default

I have had very good luck with 115gr PMC FMJ ammo. It is available and inexpensive. The Federal Champion 115gr FMJ also runs well.

My Lugers will not function with Wolf, Tula, or the Remington UMC ammo.

Lugers can be ammo sensitive like the .22 guns are. You may have to try a few different brands and once you find the "golder brand "or two, purchase a fair amount of it, and you are good to go.

Last edited by rhuff; 10-15-2012 at 05:34 PM.
rhuff is offline   Reply With Quote
Unread 10-14-2012, 07:24 PM   #7
pitsword
User
 
Join Date: Jun 2008
Location: Southern Maine
Posts: 459
Thanks: 3,964
Thanked 103 Times in 83 Posts
Default

I have had very good utility with Blazer 115 gr in all of my 9's, even my Vector Uzi carbine. I am talking function only. Geco, from years gone by, is the most accurate..not much left though. If you want to ruin a Luger or P 38, L7a1 will do it. My Uzi and CZ's thrive on it. Be safe, be informed and shoot light.
pitsword is offline   Reply With Quote
Unread 10-14-2012, 08:40 PM   #8
swampsavage
User
 
swampsavage's Avatar
 
Join Date: Jul 2012
Location: Jackson County, GA
Posts: 43
Thanks: 5
Thanked 0 Times in 0 Posts
Default

I have the same quest re: ammo. I have a newly acquired P08 in great shape and am going to try, besides the usual brands mentioned often, some Lapua 124gr FMJ. I saw it highly recommended on one of the older threads here.
I ordered it from Graf and Son and should come in a few days. When I get it to the range I shall report findings. It is costlier but you seem to indicate that price is secondary to the other requirements.
__________________
John
swampsavage is offline   Reply With Quote
Unread 10-14-2012, 08:46 PM   #9
Edward Tinker
Super Moderator
Eternal Lifer
LugerForum
Patron
 
Edward Tinker's Avatar
 
Join Date: Jun 2002
Location: North of Spokane, WA
Posts: 15,933
Thanks: 2,032
Thanked 4,530 Times in 2,092 Posts
Default

Winchester white box is one of the cheaper brands, but the ones above are inexpensive too.

I think the most important thing is to find an ammo that works well in your luger
__________________
Edward Tinker
************
Co-Author of Police Lugers - Co-Author of Simson Lugers
Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

Edward Tinker is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:16 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2024, Lugerforum.com