my profile |
register |
faq |
search upload photo | donate | calendar |
12-26-2004, 02:08 AM | #1 |
New User
Join Date: Oct 2004
Location: Vancouver
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
Finnish Lugers
Hello, where can I find out any information about finnish lugers? I am looking into buying one.
Thanks, Thomas |
12-26-2004, 05:19 PM | #2 |
User
Join Date: Jun 2002
Location: Portland, Oregon
Posts: 3,899
Thanks: 0
Thanked 1,306 Times in 429 Posts
|
Thomas,
There is not much in print regarding Finnish Lugers, best references are Still's "Axis Pistols" and Walters's "The Luger Story" and "The Luger Book". In short, Finland made small orders of 9mm Lugers (Finnish designation M-23) between 1923 and 1930, totalling about 9,500 guns--8,000 from DWM, 1,500 from Mauser. These came from Commercial stock (Alphabet Commercials), proofed with an upright crown/N, and are found with m, n, p, r, u, and no-suffixes. Some are found with Mauser Banners. The Finnish property mark is SA inside a rectangular cartouche, stamped on the left receiver and bottom of their wood-based magazine. A quarter-sized brass disc was inletted into the right grip and stamped with unit mark information. About 1940 these discs were removed to maintain military security. Finnish Lugers were used hard and reworked often. They are commonly found with mismatched parts, refinished in a matte, 'Parkerized' manner. Grips were often replaced. Front sights were often replaced with very angular, square profile sights, and the rear sights filed to match. Very often the barrels were replaced by Tikkakoski, marked with T inside a triangle, sometimes inside a circle. One of my Luger regrets is not buying a Finnish Luger when I was offered one at a very good price (I didn't know the information above and thought I was being offered a junker, I studied up after my near miss)--good luck with yours, be sure to post photos and all pertinent information once you buy it. --Dwight |
12-26-2004, 05:30 PM | #3 |
Administrator
& Site Owner LugerForum Patron Join Date: Jun 2002
Location: A Little NE of Somewhere...
Posts: 2,651
Thanks: 477
Thanked 514 Times in 128 Posts
|
Hi Thomas,
To add a bit of information regarding Lugers by the Finns, you may also want to refer to the thread linked below. While it deals specificially with HKs, you may also find it interesting: http://forum.lugerforum.com/showthre...&threadid=5310 My Best, John D. |
01-01-2005, 10:21 PM | #4 |
New User
Join Date: Oct 2004
Location: Vancouver
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
Thanks for the info! How long are the Tikkakoski barrels? The one I am looking at is chambered in 7.65mm. Is this normal?
Thanks, Thomas |
01-01-2005, 11:47 PM | #5 |
User
Join Date: Jun 2002
Location: Portland, Oregon
Posts: 3,899
Thanks: 0
Thanked 1,306 Times in 429 Posts
|
Tikka barrels came in 4" & 4 3/4", 9mm & .30.
--Dwight |
|
|