my profile |
register |
faq |
search upload photo | donate | calendar |
06-10-2002, 04:57 PM | #1 |
User
Join Date: Jun 2002
Location: Central Ohio
Posts: 64
Thanks: 0
Thanked 0 Times in 0 Posts
|
Takedown Lever Puzzle
One of the most unusual Lugers of any era is Georg Luger's personal 1904-05 model, a short-barreled special with cut down frame and custom 7-shot magazine. Both Michael Reese's "Luger Tips" and Charles Kenyon's "Lugers at Random" contain photos of the pistol, No. 10077B.
I noticed that the two books seem to show 10077B with different takedown levers. In Kenyon the lever is heavily chamfered and carries what looks like a stamp of some kind. In Reese the lever is sharp-edged and unmarked. Whatever the explanation for the anomaly may be, it would be of interest to collectors when such a historically significant gun is involved. Moderator Note: The following photo was enhanced to better show the chamfering (beveling around the edge) of the checkering on the takedown lever and submitted by user ViggoG- |
06-10-2002, 05:44 PM | #2 |
User
Join Date: Jun 2002
Location: Utah, in the land of the Sleeping Rainbow
Posts: 1,457
Thanks: 0
Thanked 1 Time in 1 Post
|
Jerry, the picture on the left is the correct one, it has a standard take down lever. Check your e-mail.
__________________
Utah, where gun control means a steady trigger pull |
06-10-2002, 05:54 PM | #3 |
RIP
Join Date: Jun 2002
Location: Southeast Texas Swamp
Posts: 2,460
Thanks: 2
Thanked 165 Times in 64 Posts
|
Jerry,
In Kenyon's other book, LUGER: THE MULTINATIONAL PISTOL is a further unexplained anomaly. On page 58 is a description of this pistol, with small b&w pictures of the left side and top, probably same ones as in his other book, as you can see the beveled edges and the small "mark". On page 59 is a full page color photo of this gun (which is now in Ralph Shattuck's collection; I actually held this gun in my sweaty palms during the two "Forum Conventions"). In this picture the lever has sharp edges and no marks. [img]confused.gif[/img] It would be enlightening if Ralph would examine his pistol and post which takedown lever is on it. [img]wink.gif[/img]
__________________
TRUMP FOR PREZ IN '20! |
06-10-2002, 06:22 PM | #4 |
User
Join Date: Jun 2002
Location: Utah, in the land of the Sleeping Rainbow
Posts: 1,457
Thanks: 0
Thanked 1 Time in 1 Post
|
__________________
Utah, where gun control means a steady trigger pull |
06-10-2002, 07:21 PM | #5 |
Moderator
2010 LugerForum Patron Join Date: Jun 2002
Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso
Posts: 7,019
Thanks: 1,090
Thanked 5,173 Times in 1,701 Posts
|
Jerry and Hugh
Your sharp eyes have uncovered yet another enigma! Kenyon's "Lugers at Random" photo dates from around 1969 when the first printing occurred. Reeses book dates from 1976, and Kenyon's "Luger: The Multi-National Pistol" was published in 1991. In this 1991 publication, there are two seven-shot Lugers, George Luger's on pages 58-59 and a Bulgarian crested example on pages 60-61. The picture of the Luger in "Lugers at Random" and the Bulgarian have the chamfered takedown lever. Reeses photo of George Luger's gun an the one in "The Multi-National Pistol" have the flat takedown lever. Hugh's photo agrees with the latter examples. The earliest photo was taken prior to 1969 while the gun was still in the Sid Aberman collection. The latest photo and Hugh's photo are taken from Ralph's collection. Who knows what hands the gun passed through or what transpired between those two times? Interestingly enough, there are at least 4 seven-shot examples in existence, and two of those are in the 55000 serial number range, dating them to around 1912 production!
__________________
If it's made after 1918...it's a reproduction |
06-10-2002, 08:09 PM | #6 |
User
Join Date: Jun 2002
Location: The USA
Posts: 5,919
Thanks: 0
Thanked 6 Times in 4 Posts
|
Based on my readings in R. Gibson's "The Krieghoff Parabellum" on page 40; the straight edged knob on the locking bolt (i.e. take down lever) is typically a Krieighoff characteristic...is it not ???
The other luger manufacturers (DWM, Mauser, Simson) apparently used chamfered or stepped edges on the knob... <img src="graemlins/yltype.gif" border="0" alt="[typing]" /> |
06-10-2002, 08:10 PM | #7 |
User
Join Date: Jun 2002
Location: Utah, in the land of the Sleeping Rainbow
Posts: 1,457
Thanks: 0
Thanked 1 Time in 1 Post
|
Ron, your memory and your ability to relocate the info in your references is amazing. This is perhaps an excellent example of what I am trying to relate in my postings to the 'Boosting' topic. Is this an example of 'boosting' or just errors in the documentation of a piece by observers that may have not taken adequate notes?
__________________
Utah, where gun control means a steady trigger pull |
06-10-2002, 11:03 PM | #8 |
User
Join Date: Jun 2002
Location: Central Ohio
Posts: 64
Thanks: 0
Thanked 0 Times in 0 Posts
|
Reply to John Sabato:
John, in my copy of Reese, the photo is very poorly printed, and the knurled head of the lever is literally lost in black ink! As I think you gleaned from the other posts, my comments were strictly about the "shank" of the lever, and that can, I believe, be seen clearly enough to distinguish it from the Kenyon picture. If I could, though, I'd be glad to put up a better scan. Perhaps I should add for clarity that both authors specifically call out the gun as 10077B. Thanks Jerry, I deleted my own comment on your photo after editing the first post with a slightly clearer photo as submitted by ViggoG - //John Sabato |
06-10-2002, 11:34 PM | #9 |
User
Join Date: Jun 2002
Location: Central Ohio
Posts: 64
Thanks: 0
Thanked 0 Times in 0 Posts
|
To Ron and Herb:
I have the 1990 reformatted edition of "Lugers at Random," but Ron's information appears correct because Kenyon credits Mr. Aberman for the photo while saying the gun is (now) in Ralph's collection. Herb's photo shows pretty clearly that the current lever is the plain unchamfered (Reese) version. Thanks to everyone, so far, for adding HELPFUL information and sticking to OBSERVABLE facts on this little mystery! |
06-10-2002, 11:42 PM | #10 |
User
Join Date: Jun 2002
Location: Rio Rancho, New Mexico
Posts: 4,583
Thanks: 958
Thanked 970 Times in 276 Posts
|
This is the one I took a few years back <img src="graemlins/beerchug.gif" border="0" alt="[cheers]" />
__________________
Thor's Luger Clinic http://members.rennlist.com/lugerman/ Ted Green (Thor Yaller Boots) 725 Western Hills Dr SE, Rio Rancho, NM 87124 915-526-8925 Email thor340@aol.com ----------------------------------- John3:3 Jesus answered and said to him, "Most assuredly, I say to you, unless one is born again, he cannot see the kingdom of God." |
|
|