Luger cool disassemble trick

[kurusu]

To many among us this is really old news, but.

I've always cringed whenever I see in disassemble instructions that state:

"Press the barrel on a hard surface"

To me, that's just wrong.

There are better ways. By far the easiest has been divulged, if I remember correctly, by Ithacaartist. After checking that chamber is clear, insert an empty magazine pull the action open until it locks, remove magazine and then rotate disassembly lever. It's easy effective and doesn't involve external hard surfaces.

Now if you want to impress your friends, you can do it the old Army way:

First step, hold your Luger with your right hand like this (2 pictures provided)




Second step, (no pictures, sorry) while holding the pistol in step one position, press the barrel back with your left hand.

Third step, making pressure with your index finger on the right toggle knob keep the barrel into retracted position (again 2 pictures)




Fourth step, while maintaining 3rd step rotate down disassembly lever.

You'll find that practice maketh perfect.

[DTR04]

That's how I've always done it.

[mrerick]

That's what works for me...

[ithacaartist]

Mario, I will try this method out--right after I master the art of tearing a phone book in half! The Erma toggle pistols work sort of opposite to this, the upper is pushed forward to allow the locking bolt's removal. It's easy enough to grip the barrel and push against the frame with the thumb. The situation that sometimes gives me a blood blister is clearing a jam (in a .22 cal. KGP 69) in which the nose of the round has dug into the top edge of the chamber mouth, is over-ridden by the breech block, and wedged in the lips of the mag, all at once. Taking the pressure off the arrangement by holding the toggles back is necessary when dropping the mag, which is a three-hander of a move. Note: Remove skin from immediate area before releasing toggle knobs!

[Sieger]

Originally Posted by kurusu

To many among us this is really old news, but.

I've always cringed whenever I see in disassemble instructions that state:

"Press the barrel on a hard surface"

To me, that's just wrong.

There are better ways. By far the easiest has been divulged, if I remember correctly, by Ithacaartist. After checking that chamber is clear, insert an empty magazine pull the action open until it locks, remove magazine and then rotate disassembly lever. It's easy effective and doesn't involve external hard surfaces.

Now if you want to impress your friends, you can do it the old Army way:

First step, hold your Luger with your right hand like this (2 pictures provided)
Attachment 59120

Attachment 59121

Second step, (no pictures, sorry) while holding the pistol in step one position, press the barrel back with your left hand.

Third step, making pressure with your index finger on the right toggle knob keep the barrel into retracted position (again 2 pictures)

Attachment 59122
Attachment 59123

Fourth step, while maintaining 3rd step rotate down disassembly lever.

You'll find that practice maketh perfect.

Hi,

You have recreated what is told us in the original DWM Owners' Manual.

Sieger

[sheepherder]

Originally Posted by Sieger

Hi,

You have recreated what is told us in the original DWM Owners' Manual.

Sieger

+ 1

As illustrated in the manual, I use my right hand, just squeeze and the barrel extension will retract ~3/8", which is enough to twist the takedown lever down with the left hand, remove the sideplate, and pull the cannon assembly off.

[kurusu]

Originally Posted by Sieger

Hi,

You have recreated what is told us in the original DWM Owners' Manual.

Sieger

I'm aware of that (and that is the way I was taught to do it at what appears to have been centuries ago ). As stated in the beginning of my post, this, to most of us is old news. But, having read countless times the "press the barrel against hard surface" mantra I decided to post the "old school way". with pictures of my own.

As I read through the posts. I find there are members who don't have a clue as how to disassemble a Luger. This post was intended for those who already know the theory but find it hard to put in practice.

By the way, the real trick is in the step two.

[DonVoigt]

What ever works for you.

I find the "press against hard surface(or soft) works just fine; just because a surface is "hard" does not mean it will do any damage. The next step is quite often to further dis assemble the pistol, so having a "surface" to lay the parts on is helpful.

Besides, my hands are no longer strong enough to use the "one hand" method.

[kurusu]

Originally Posted by DonVoigt

What ever works for you.

I find the "press against hard surface(or soft) works just fine; just because a surface is "hard" does not mean it will do any damage. The next step is quite often to further dis assemble the pistol, so having a "surface" to lay the parts on is helpful.

Besides, my hands are no longer strong enough to use the "one hand" method.

In that case I suggest the easy way. Use the benefits of the holdopen.

Hard surfaces sometimes are not readily available.

[sheepherder]

Originally Posted by DonVoigt

Besides, my hands are no longer strong enough to use the "one hand" method.

You should have exercised that hand more often when you were younger...

[kurusu]

Originally Posted by sheepherder

You should have exercised that hand more often when you were younger...

That's just mean.

[DonVoigt]

Originally Posted by sheepherder

You should have exercised that hand more often when you were younger...

I "should" have done a lot of stuff, and not done other stuff!

I'm just happy to be around, those hard surfaces are abundant;
no use hurting my hand!

[John Sabato]

Originally Posted by kurusu

Hard surfaces sometimes are not readily available.

??? Table-top, Bench-top, wall, floor... they all seem pretty handy to me!

[Zorba]

My forehead works just fine!

[kurusu]

Originally Posted by John Sabato

??? Table-top, Bench-top, wall, floor... they all seem pretty handy to me!

[John Sabato]

Originally Posted by zormpas

My forehead works just fine!

I was going to include "forehead" but thought that might offend some of those here that have a soft spot (for Lugers!).

[John Sabato]

Originally Posted by kurusu

Attachment 59153

I suppose the guy next to you would object to using his helmet, eh?

[kurusu]

Originally Posted by John Sabato

I suppose the guy next to you would object to using his helmet, eh?

He just might.

[DonVoigt]

Originally Posted by kurusu

Attachment 59153

This area is not the time or place to dis assemble your pistol,
it is too late, nothing can be done it that environment.

Better to carry two or three weapons, JMHO.

[kurusu]

Don't be coy! Just go over there and borrow that Tommy's helmet.