my profile |
register |
faq |
search upload photo | donate | calendar |
08-19-2012, 09:47 PM | #1 |
User
Join Date: Jul 2011
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
|
hypothetical question
Just because there is a OMG throw it in the river crowd: Suppose I knew where there was a luger, good condition with absolutely no marking whatsoever. no numbers, no dates, no proofs, no obvious grind marks, good even finish all over, etc. Would that be terribly unusual, valuable, or of interest?? Story was that it was a vet bring back of very long ago, I'd guess a lunch box special. Should be legal since clearly made before serials were required? I've read the forum often, but first post. Appreciate the level of experience displayed.
Respects. |
08-19-2012, 09:58 PM | #2 |
Super Moderator
Eternal Lifer LugerForum Patron Join Date: Jun 2002
Location: North of Spokane, WA
Posts: 15,927
Thanks: 2,026
Thanked 4,525 Times in 2,090 Posts
|
I have seen several sell and sold one, that had a number added to the rear, but no other proofs or acceptance, yes legal, unusual yes, makes value higher, not really, only to the right guy....
|
08-19-2012, 10:30 PM | #3 |
Lifer
Lifetime Forum Patron Join Date: Feb 2009
Location: ...on the 'ol Erie Canal...
Posts: 8,182
Thanks: 1,400
Thanked 4,442 Times in 2,330 Posts
|
No toggle inscription??? How would you tell who made it??? (Unless it has a hump)...
__________________
I like my coffee the way I like my women... ...Cold and bitter... |
08-20-2012, 06:49 AM | #4 |
User
Join Date: Dec 2010
Location: Virginia
Posts: 86
Thanks: 102
Thanked 15 Times in 14 Posts
|
If made before 1968 (?) it is legal not to have a serial number on the firearm.
|
08-20-2012, 07:20 AM | #5 |
User
Join Date: Nov 2011
Posts: 224
Thanks: 0
Thanked 81 Times in 41 Posts
|
Simpson just sold one that had all and only "42" replacement parts numbers. Even the frame. $2750 I liked it and would have purchased it!
|
08-20-2012, 10:01 AM | #6 |
Patron
LugerForum Patron Join Date: Jun 2002
Location: POB 398 St.Charles,MO. 63302
Posts: 5,089
Thanks: 6
Thanked 736 Times in 483 Posts
|
In the past I've had a couple of completely unnumbered unbuffed WW2 lugers made up almost completely of S/42 or 42 marked spare parts, most likely from an armour's repair kit. TH
|
08-20-2012, 11:09 AM | #7 |
Moderator
Lifetime LugerForum Patron Join Date: Oct 2002
Location: Europe
Posts: 5,053
Thanks: 1,036
Thanked 3,988 Times in 1,205 Posts
|
Well, considering the fact that the pistol was made in Germany, which had strict proof laws, any luger pistol that left the factory via the front door had at least a serial number and a series of proof markings.
You sometimes see pistols that were quite expertly reworked to remove all proof and property markings, usually done to conceal the origin of the pistol. It happened in European countries following both WW1 and WW2 when guns got 'lost' and the new owners wouldn't want it to be traceable. |
08-20-2012, 08:39 PM | #8 |
User
Join Date: Jul 2011
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
|
|
09-23-2012, 06:01 PM | #9 |
User
Join Date: Jun 2002
Location: Iowa
Posts: 768
Thanks: 0
Thanked 19 Times in 11 Posts
|
I've seen a DWM supposed to be a lunch box special that had absolutely no markings (memory's a bit foggy, might have had DWM on the toggle) and was in the white
|
09-23-2012, 06:27 PM | #10 |
Moderator
Lifetime Forum Patron Join Date: Jun 2002
Location: Arizona/Colorado
Posts: 7,771
Thanks: 4,922
Thanked 3,123 Times in 1,434 Posts
|
George..Welcom to the Forum! Is there a safety marking? Gisechert? Is the extractor marked on the left side? Geladen?
Are there worker stamps/markings on the interior of the pistol? Have you looked at the undersides of parts for hidden numbers? Are the grips marked with a serial or proof on the insides?
__________________
Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know." |
09-24-2012, 12:15 PM | #11 |
Lifer
Lifetime Forum Patron Join Date: Jun 2002
Location: The Capital of the Free World
Posts: 10,153
Thanks: 3,003
Thanked 2,304 Times in 1,096 Posts
|
Please post a closeup clear focus photo of the front of the frame above the trigger guard and below the barrel...
I have seen several unmarked Lugers in my time... some had been altered for nefarious reasons, and a couple were righteous... one, formerly part of a long time friend's collection, was even equipped with what appeared to be a factory original removeable front sight band that was threaded on... The front sight was a spring-loaded part of the removal latch...and likely at one time had a matching silencer, but the friend never saw that piece... Wish I could have afforded that one... it was special.
__________________
regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL and are endowed by their Creator with certain UNALIENABLE rights, and among these are life, LIBERTY, and the pursuit of happiness..." |
09-25-2012, 10:30 PM | #12 |
User
Join Date: Jul 2011
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
|
|
09-26-2012, 09:42 AM | #13 |
Lifer
Lifetime Forum Patron Join Date: Jun 2002
Location: The Capital of the Free World
Posts: 10,153
Thanks: 3,003
Thanked 2,304 Times in 1,096 Posts
|
Sharper Focus Please
Please retake this photo in natural light, perhaps outside on an overcast day. Use macro-mode on your camera (if it is available) to get sharp focus on the closeup surfaces...
This photo that you posted is unfortuately not sharp enough. Only the area I have shown is what I am looking for...
__________________
regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL and are endowed by their Creator with certain UNALIENABLE rights, and among these are life, LIBERTY, and the pursuit of happiness..." |
09-26-2012, 10:28 AM | #14 |
User
Join Date: Feb 2010
Location: Tennessee
Posts: 1,149
Thanks: 159
Thanked 663 Times in 318 Posts
|
Does this go for all calibers and types of firearms? I have a .22 rifle without serial number, a single shot cheapo my father-in-law bought at Sears in the 50's or 60's. This was obviously legal enough back then, but I have seen comments saying that it was only .22s that could be sold without serial numbers.
|
09-26-2012, 01:22 PM | #15 |
User
Join Date: Mar 2008
Location: Marco Island, Florida
Posts: 4,867
Thanks: 1,685
Thanked 1,916 Times in 1,192 Posts
|
Yes. If your state or local statutes require documentation at time of sale, you simply state "N/A" or "none" where it requires a serial number be filled in. There were thousands of firearms made by/for Sears Roebuck, Montgomery Ward, etc. prior to 1968 that never had serial numbers.
Firearms were not required to be serialed until the 1968 firearms law. |
09-26-2012, 10:03 PM | #16 |
User
Join Date: Jul 2011
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
|
|
09-26-2012, 10:13 PM | #17 |
Super Moderator - Patron
LugerForum Life Patron Join Date: Dec 2009
Location: Eastern North Carolina, USA
Posts: 3,907
Thanks: 1,374
Thanked 3,108 Times in 1,509 Posts
|
From your latest pictures, I think it's possible to see that the serial number of the frame was removed at some point.
This front surface of the frame is normally completely flat. Just below the level where the receiver rail rides in the frame, you can clearly see the edge (on both sides of the barrel) where the horizontal grinding starts. A part of the last digit may still be visible. The barrel base also shows some tool marks and unusual contours, particularly visible near the witness mark... Marc
__________________
Igitur si vis pacem, para bellum - - Therefore if you want peace, prepare for war. |
09-26-2012, 10:17 PM | #18 |
User
Join Date: Mar 2008
Location: Marco Island, Florida
Posts: 4,867
Thanks: 1,685
Thanked 1,916 Times in 1,192 Posts
|
I agree, numbers ground away on both Barrel and Frame.......
|
09-27-2012, 08:01 PM | #19 |
User
Join Date: Jul 2011
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
|
Interesting since the finish seems perfectly even, and it seemed like the tool marks looked the same in closeup as on the trigger guard.
|
09-27-2012, 09:32 PM | #20 |
User
Join Date: Mar 2008
Location: Marco Island, Florida
Posts: 4,867
Thanks: 1,685
Thanked 1,916 Times in 1,192 Posts
|
Look at the bottom area of the last photo, where the upper receiver and the frame rails interact..That area of the frame should be perfectly flat and evenly radiused all the way to the trigger guard. As is obvious in the photo, this area of the frame has been ground down.
Now compare it to the exact same area on the other side of the frame, (upper part of photo). Notice that this side is ground down much less, making the grind fairly uneven? This would never have happened if this had been factory finishing. |
|
|