LugerForum Discussion Forums - View Single Post

Hugh · 06-12-2002, 06:48 PM

Unspellable,

I can only answer a couple of your questions, as these loads were fired a couple of years ago and the only info I have is what I posted.

I am using WW brass, the recoil spring on the 6" bbl gun is a Wolff 10% extra strength spring. Recoil spring on the other two guns was original, so don't know what strength.

The loads listed as "failed to cycle" were included if two out of five shots did not cycle the gun properly. [img]cool.gif[/img]

06-12-2002, 06:48 PM	#4
Hugh RIP Join Date: Jun 2002 Location: Southeast Texas Swamp Posts: 2,460 Thanks: 2 Thanked 165 Times in 64 Posts	Unspellable, I can only answer a couple of your questions, as these loads were fired a couple of years ago and the only info I have is what I posted. I am using WW brass, the recoil spring on the 6" bbl gun is a Wolff 10% extra strength spring. Recoil spring on the other two guns was original, so don't know what strength. The loads listed as "failed to cycle" were included if two out of five shots did not cycle the gun properly. [img]cool.gif[/img] __________________ *TRUMP FOR PREZ IN '20!*