Quote:
Originally Posted by grantman
Thanks for the load info. I have never used CFE and I know nothing about it. I'm always looking for new propellants. Can you tell me more about it?
I have had very good luck with the following:
Home cast Lee 124 grain TC (Lyman #2 alloy).
Rooster Jacket tumble lube
3.8 Grains Bullseye. ( a modest load, per Lyman Cast Bullet Handbook) New formula Bullseye is very clean burning and meters well.
Federal case, Winchester small pistol primer
C.O.L. 1.075" taper crimp
Perfect function in my mixmaster PO8. I color primers with a sharpie and this load does not scuff the ink upon firing. Primers are softly round with no pocket-filling or expansion. Cycling seems very gentle. No leading.
|
Hi,
Substitute only the Lyman 121 grain TC, at an O.A.L. of 29mm, and you will be most happy.
Respectfully,
Sieger