LugerForum Discussion Forums - View Single Post

mrerick · 01-01-2013, 04:34 PM

When you have to manually extract the cartridge case, do you do this by hand operating the toggle train?

Do you feel any particular resistance early in manually extracting a fired case?

If so, you might have some shape or surface finish issues in the chamber.

If you adjust spring length / tension be sure to use some masking tape at the rear of the frame between the receiver ears where the rear toggle will hit the frame. If recoil resistance gets too light, you could end up peening this area.

01-01-2013, 04:34 PM	#7
mrerick Super Moderator - Patron LugerForum Life Patron Join Date: Dec 2009 Location: Eastern North Carolina, USA Posts: 3,900 Thanks: 1,372 Thanked 3,094 Times in 1,503 Posts	When you have to manually extract the cartridge case, do you do this by hand operating the toggle train? Do you feel any particular resistance early in manually extracting a fired case? If so, you might have some shape or surface finish issues in the chamber. If you adjust spring length / tension be sure to use some masking tape at the rear of the frame between the receiver ears where the rear toggle will hit the frame. If recoil resistance gets too light, you could end up peening this area. __________________ Igitur si vis pacem, para bellum - - Therefore if you want peace, prepare for war.