LugerForum Discussion Forums - View Single Post

Johnny Peppers · 07-07-2001, 06:50 PM

Just my opinion, but I wouldn't remove any pins other than the axel pin to remove the toggle assembly and the firing pin. The axel pin is much easier to remove if you will trip the sear when the receiver assembly is off the frame. Same thing putting the toggle assembly back in the receiver; trip the sear to relax the tension on the assembly. The pin will go in or out easily.

07-07-2001, 06:50 PM	#8
Johnny Peppers User Join Date: Jun 2002 Location: Calion, Arkansas Posts: 1,042 Thanks: 0 Thanked 1 Time in 1 Post	Re: "Shooters" Care and Maintenance Just my opinion, but I wouldn't remove any pins other than the axel pin to remove the toggle assembly and the firing pin. The axel pin is much easier to remove if you will trip the sear when the receiver assembly is off the frame. Same thing putting the toggle assembly back in the receiver; trip the sear to relax the tension on the assembly. The pin will go in or out easily.