I'm writing here first, in order to post a WANT TO BUY add which is to follow shortly! When you're looking at P.08 barrels to buy, either original or aftermarket, you'll find a great discrepancy in quality and machining overall. The best available, (sometimes!) are of course, original armorers spares, or take offs, if done with the right tools and fixtures. The best 4" spares from WW2 are predominantly Steyr with a sprinkling of Mauser. Next, would be the, "MADE IN GERMANY" marked 4" barrels that probably go back a few decades. There are quite a few Steyr, post war, "MADE IN AUSTRIA" which to me, should be perfect, but actually leave some to be desired when you discover they don't index properly or are a little off on the head spacing?
On longer barrels, the major parts suppliers have all made some at one time or the other? And here is where the problems begin!!!
out side of the normal issues, indexing, torque, and headspacing, most have a killer flaw, that at best is correctible, but at worst, will keep the shade tree Luger smith in/on the bleachers, as it really is an issue when doing this type of work. And that issue is, the feed ramp is cut with a radius or ball end mill cutter bit, and because of such, the buller nose doesn't glide up the ramp, but instead, it stops in the concave area of where the ramp would normally be! To make them work, you need to taks a die grinder and re-cut the ramp back in WITHOUT going to deep on the breach face, and also too far into the chanber so as to loose case wall support past the brass inner web.
I've repaired a lot of them, and ruined several as well, it's a crap shoot. Now the reason I'm writing this is because in my search for barrels, I do not want to pay full retail for a sub quality barrel!
But, I'm kind of up against it, as I need barrels and therefor cannot be too picky...
Anyway, I can fix your barrel if it has the issue i mentioned above, or buy it from you just as well... bottom line, I need some barrels... Please see the WTB add and see what you can do... Best to all, til......lat'r.....GT...
