LugerForum Discussion Forums - View Single Post

spangy · 09-05-2021, 11:34 PM

I suspect that this only happens when you use a certain brand of ammo ??
Does it happen with various ammo's or just one brand ??
This annoying glitch happened to me years ago and it turned out that the old mag I was using with a certain ammo caused this effect.
The old mag had its feed lips bent outwards over the years which caused the ammo to feed at an angle slightly more upward than is normal ... the ammo I used had a pronounced conical shape that caused it to just brush the barrels upper chamber on the way in.
Like your case a gentle nudge was all that was needed to complete the load.

I restored the mags lip geometry and voila the fix was in.

I never thought I would see this symptom again but maybe that is whats going on with your gun ... or maybe its the mainspring ??
I know Wolf's has a spring package with 3 different load ratings
Reduced Power...: 36 Lb.
Factory Standard.: 38 Lb.
Extra Power........: 40 Lb.
https://www.gunsprings.com/LUGER/cID1/mID38/dID162

It never hurts to have spare springs on hand ... I have several ... so no harm no foul if new springs don't fix the problem.

I 100% know you will fix this Mark and if all the above fails you can still carefully start 'hand fitting' your parts the old fashioned German way.

Good luck again .... I wish I was there to assist .... for me this stuff is fun.

09-05-2021, 11:34 PM	#15
spangy Lifer Lifetime Forum Patron Join Date: Sep 2020 Location: Winnipeg, Canada Posts: 607 Thanks: 2,984 Thanked 1,047 Times in 422 Posts	I suspect that this only happens when you use a certain brand of ammo ?? Does it happen with various ammo's or just one brand ?? This annoying glitch happened to me years ago and it turned out that the old mag I was using with a certain ammo caused this effect. The old mag had its feed lips bent outwards over the years which caused the ammo to feed at an angle slightly more upward than is normal ... the ammo I used had a pronounced conical shape that caused it to just brush the barrels upper chamber on the way in. Like your case a gentle nudge was all that was needed to complete the load. I restored the mags lip geometry and voila the fix was in. I never thought I would see this symptom again but maybe that is whats going on with your gun ... or maybe its the mainspring ?? I know Wolf's has a spring package with 3 different load ratings Reduced Power...: 36 Lb. Factory Standard.: 38 Lb. Extra Power........: 40 Lb. https://www.gunsprings.com/LUGER/cID1/mID38/dID162 It never hurts to have spare springs on hand ... I have several ... so no harm no foul if new springs don't fix the problem. I 100% know you will fix this Mark and if all the above fails you can still carefully start 'hand fitting' your parts the old fashioned German way. Good luck again .... I wish I was there to assist .... for me this stuff is fun. __________________ Whoever said that "money can't buy you happiness" never bought a Luger. WTB - Take Down Lever & Trigger Plate (#90) for an Imperial Artillery.