LugerForum Discussion Forums - View Single Post

DanM · 12-26-2005, 09:25 AM

Update:

Since my initial post, I have made some changes to my P08. The main change was the addition of a new recoil spring from Gun Parts Corp. The cost was $6.00, and function is greatly improved. The new spring was indeed longer and stronger than what was in it. With this new spring, function is near perfect with my unmodified Mecgar mag, and Winchester white box, or my Ranier .357" flat point load. Function is also good with my period mag, although it usually fails to lock the toggle open on the last round. The Mecgar mag that I modified with the GT parts now only works well with hot loads, so I am not using it much. I have no complaints with accuracy. The Ranier load hits at exact point of aim at 25 feet, making ragged, one hole groups, at that distance. At 25 yards, they also group well, but about 8" high. I am also having fun hittting my 50 yard plates, just aim at the base, and they ding every time!
I also had to change the grips. Unfortunatly, the right hand factory grip broke. The thin strip of wood that rides against the front strap, came loose, allowing the right grip to rotate forward during use. Since this one is a byf41, I added a set of aftermarket black plastic brips, also from GPC, (cost $25). They required some work for a flush fit, but look right, and feel great.
So, I am now able to enjoy the Luger experience with an accurate, and good functioning byf41. Thanks to all for the helpful input....DanM

12-26-2005, 09:25 AM	#15
DanM User Join Date: Nov 2004 Location: East Bend, NC Posts: 11 Thanks: 0 Thanked 0 Times in 0 Posts	Update: Since my initial post, I have made some changes to my P08. The main change was the addition of a new recoil spring from Gun Parts Corp. The cost was $6.00, and function is greatly improved. The new spring was indeed longer and stronger than what was in it. With this new spring, function is near perfect with my unmodified Mecgar mag, and Winchester white box, or my Ranier .357" flat point load. Function is also good with my period mag, although it usually fails to lock the toggle open on the last round. The Mecgar mag that I modified with the GT parts now only works well with hot loads, so I am not using it much. I have no complaints with accuracy. The Ranier load hits at exact point of aim at 25 feet, making ragged, one hole groups, at that distance. At 25 yards, they also group well, but about 8" high. I am also having fun hittting my 50 yard plates, just aim at the base, and they ding every time! I also had to change the grips. Unfortunatly, the right hand factory grip broke. The thin strip of wood that rides against the front strap, came loose, allowing the right grip to rotate forward during use. Since this one is a byf41, I added a set of aftermarket black plastic brips, also from GPC, (cost $25). They required some work for a flush fit, but look right, and feel great. So, I am now able to enjoy the Luger experience with an accurate, and good functioning byf41. Thanks to all for the helpful input....DanM __________________ Ten Bears: "You are the Grey Rider. You would not make peace with the blue coats. You may go in peace." Josey Wales: "I reckon not."