LugerForum Discussion Forums - View Single Post - Malfunction in a Swiss 06/24 ??(Problem solved Please delete thread)

Dean762 · 11-07-2005, 06:57 PM

Hello folks

Spent a little range time today and test fired an 06/24 Swiss luger. This gun is super accurate and is in the original 30 luger caliber. Were talking 2-3 inchs at 25 yds which is more accurate than I am. Only problem was that the gun was misfeeding about every other rd. I tried 4 different mags and 3 different ammo types all with the same results. The round would fail to chamber and would wind up nose up at the chamber face. I used fiocchi fmj, jsp and some Lapua fmj. The gun ejects and extracts fine but just wont feed reliably. I was really surprised. I have fired 4 other swiss lugers and have never had a malfunction of any type. I did grease the rails but I dont think I used to much. Could it be a mainspring problem? The action feels plenty strong. Well any assistance would be appreciated.

Regards !

Dean

11-07-2005, 06:57 PM	#1
Dean762 User Join Date: Jun 2004 Posts: 72 Thanks: 0 Thanked 0 Times in 0 Posts	Malfunction in a Swiss 06/24 ??(Problem solved Please delete thread) Hello folks Spent a little range time today and test fired an 06/24 Swiss luger. This gun is super accurate and is in the original 30 luger caliber. Were talking 2-3 inchs at 25 yds which is more accurate than I am. Only problem was that the gun was misfeeding about every other rd. I tried 4 different mags and 3 different ammo types all with the same results. The round would fail to chamber and would wind up nose up at the chamber face. I used fiocchi fmj, jsp and some Lapua fmj. The gun ejects and extracts fine but just wont feed reliably. I was really surprised. I have fired 4 other swiss lugers and have never had a malfunction of any type. I did grease the rails but I dont think I used to much. Could it be a mainspring problem? The action feels plenty strong. Well any assistance would be appreciated. Regards ! Dean