LugerForum Discussion Forums - View Single Post

Strider · 06-07-2005, 02:33 PM

Hi Everyone, I need your help with a project I am working on.

A couple of years ago a cousin of mine gave me a rifle that had no stock, most of the blueing removed and missing a spring for the firing pin that someone had given to him. I asked if there was a stock for it and he said the person that had it previously did not have one for it. Well I forgot about it until I was doing some cleaning and came across it again. Well, I needed a summer project and getting this back to working order sounded like a good plan.

Anyway, I was not sure what model it was so I have been searching the web to see what I could find out. I finally found out that it is a Mauser es350 championship model 22 cal. single shot rifle.

Here is a link to some pictures of an es350. You will need to scroll down a ways to find it. The one I have looks like this one, minus the bluing.

http://homepage.ntlworld.com/gewehr/...rchive%203.htm

The gun is in great shape especially after giving it a good cleaning. That is when I found out that it was missing a spring for the firing pin.

My hope is that one of you will be able to direct me in the right direction to locate springs for it and a stock. Also, I am looking for a parts drawing of this rifle if there is any available.

Thanks in advance for any help or advice.

Sincerely,
Sid.

06-07-2005, 02:33 PM	#1
Strider User Join Date: Jun 2002 Location: Albuquerque, New Mexico Posts: 256 Thanks: 26 Thanked 0 Times in 0 Posts	Mauser es350 Hi Everyone, I need your help with a project I am working on. A couple of years ago a cousin of mine gave me a rifle that had no stock, most of the blueing removed and missing a spring for the firing pin that someone had given to him. I asked if there was a stock for it and he said the person that had it previously did not have one for it. Well I forgot about it until I was doing some cleaning and came across it again. Well, I needed a summer project and getting this back to working order sounded like a good plan. Anyway, I was not sure what model it was so I have been searching the web to see what I could find out. I finally found out that it is a Mauser es350 championship model 22 cal. single shot rifle. Here is a link to some pictures of an es350. You will need to scroll down a ways to find it. The one I have looks like this one, minus the bluing. http://homepage.ntlworld.com/gewehr/...rchive%203.htm The gun is in great shape especially after giving it a good cleaning. That is when I found out that it was missing a spring for the firing pin. My hope is that one of you will be able to direct me in the right direction to locate springs for it and a stock. Also, I am looking for a parts drawing of this rifle if there is any available. Thanks in advance for any help or advice. Sincerely, Sid. __________________ Sid. Patience is a bitter plant, but it has sweet fruit. ~German Proverb If it is made before 1930 ..........It is a prototype.