LugerForum Discussion Forums - View Single Post - What bullet mold do you recommend for the .30 Mauser

Doubs · 10-02-2002, 06:09 PM

RCBS offers a 2 cavity mold that drops a 77 grain bullet at about .311 - .312". If your bore is original, you'll likely need a cast bullet at .311" minimum. If it's been relined, the grooves are likely .308" and a bullet sized to .309 or .310" will work OK as long as the chamber will accept the cartridge. (Original chambers tend to be larger than newer ones)

The NRA Reloading book lists a load using Bullseye that should work well in your Broomhandle. I'll check when I get home.

10-02-2002, 06:09 PM	#2
Doubs User Join Date: Jun 2002 Location: Byron, Georgia Posts: 1,742 Thanks: 826 Thanked 1,788 Times in 590 Posts	RCBS offers a 2 cavity mold that drops a 77 grain bullet at about .311 - .312". If your bore is original, you'll likely need a cast bullet at .311" minimum. If it's been relined, the grooves are likely .308" and a bullet sized to .309 or .310" will work OK as long as the chamber will accept the cartridge. (Original chambers tend to be larger than newer ones) The NRA Reloading book lists a load using Bullseye that should work well in your Broomhandle. I'll check when I get home.