The 9mm is 125g, sorry, and I'm not bringing the sizer die all the way down on the shellholder. My RCBS book says to make contact with the die, then back off 1/4 to 1/2 turn. That's probably the problem. The .45 is .45acp, and its an unmessesd with Remington 1911A1 made in 1945, so the spring is most likely weak. I picked up a .357 Colt Trooper last week, shot all my store bought .38 & .357, will get my dies for it this week and will start reloading asap. Is there any case differences between .38 special, 38+P, and .357? Or, as endlessly pondered , does size matter or is it all in the load?
rk
|