[lugerholsterrepair]

Robert, This simple method of fixing the stock to the holster is very easy. I suspect you have already done it. Put the stock up to the holster and slip the stock block of the holster into the stock slot. With some slack for working, seperate the two pieces a little to be able to thread the shoulder straps. Start on the stock side and slip the shoulder strap end into the bottom slot, thru the stock and into the bottom slot of the holster stock block. Thread it up thru the stock block and back into the top slot of the stock. Take the steel or brass button provided and attach the shoulder straps . After doing this to both sides pull on the straps so that both stock and holster pull up tight together. This will complete the attachment. Good luck! Jerry Burney