LugerForum Discussion Forums - View Single Post - P08 Disassembly Problem <IMG SRC="/luger/graphics/frown.gif" BORDER=0 ALT=":(">

Robert Wiggins · 06-03-2001, 11:47 AM

Folks;

I definitely need some help with "Step 12" of the disassembly instructions in our Tech Info section.

It states "12. With a fine screwdriver push the Trigger Bar Spring". Seems simple but I can't see how to push it in any direction since the trigger bar end rests under the spring and has a high stepped edge that would prevent sliding over the bar without first somehow lifting it up.

Please!!! need more detailed advise on the spring removal, as I don't want to risk breakage. I know we have some experts here who have done this many times.

Regards to all

06-03-2001, 11:47 AM	#1
Robert Wiggins User Join Date: Jul 2002 Location: Toronto, Ontario, Canada Posts: 142 Thanks: 16 Thanked 0 Times in 0 Posts	P08 Disassembly Problem Folks; I definitely need some help with "Step 12" of the disassembly instructions in our Tech Info section. It states "12. With a fine screwdriver push the Trigger Bar Spring". Seems simple but I can't see how to push it in any direction since the trigger bar end rests under the spring and has a high stepped edge that would prevent sliding over the bar without first somehow lifting it up. Please!!! need more detailed advise on the spring removal, as I don't want to risk breakage. I know we have some experts here who have done this many times. Regards to all