LugerForum Discussion Forums - View Single Post

Johnny Peppers · 06-29-2002, 04:41 PM

I looked at an early '06 Navy with the extra cut, and a 1917 that does not have the cut. There is a noticeable difference in the depth the V cut when comparing the pistols side by side. With just a small machinists square for a scale, the difference appears to be around 1/32 deeper on the sight with the extra cut. I have never read if the sights were actually regulated, or if this is just within manufacturing tolerances.

06-29-2002, 04:41 PM	#14
Johnny Peppers User Join Date: Jun 2002 Location: Calion, Arkansas Posts: 1,042 Thanks: 0 Thanked 1 Time in 1 Post	I looked at an early '06 Navy with the extra cut, and a 1917 that does not have the cut. There is a noticeable difference in the depth the V cut when comparing the pistols side by side. With just a small machinists square for a scale, the difference appears to be around 1/32 deeper on the sight with the extra cut. I have never read if the sights were actually regulated, or if this is just within manufacturing tolerances.