LugerForum Discussion Forums - View Single Post

Thor · 05-25-2003, 09:51 PM

That pin is soft and can be bent to fit tighter when installed. CAUTION-MOST trigger LEVERS (the 90 degree angle lever that the pin holds in place is HARDENed and will BREAK if you try to bend it cold. BUT the pin is soft, if you put it in a vice and tap the end over slightly it will tighten up immensely when installed. Thanks to Tom Heller and Hugh Clark for this tip, I use it ALL the time.

05-25-2003, 09:51 PM	#6
Thor User Join Date: Jun 2002 Location: Rio Rancho, New Mexico Posts: 4,583 Thanks: 958 Thanked 970 Times in 276 Posts	That pin is soft and can be bent to fit tighter when installed. CAUTION-MOST trigger LEVERS (the 90 degree angle lever that the pin holds in place is HARDENed and will BREAK if you try to bend it cold. BUT the pin is soft, if you put it in a vice and tap the end over slightly it will tighten up immensely when installed. Thanks to Tom Heller and Hugh Clark for this tip, I use it ALL the time. __________________ Thor's Luger Clinic http://members.rennlist.com/lugerman/ Ted Green (Thor Yaller Boots) 725 Western Hills Dr SE, Rio Rancho, NM 87124 915-526-8925 Email thor340@aol.com ----------------------------------- John3:3 Jesus answered and said to him, "Most assuredly, I say to you, unless one is born again, he cannot see the kingdom of God."