Hello renaissance,
In case you can not get back together.
..to put back together...
Take the Luger apart and slide the cannon (barrel and toggle) off frame and look at back of toggle.
You will see the Coupling Link (S shape bar hanging down), this has to connect to the Recoil Lever.If you look down inside the frame at the back you will see what looks like a pair of hooks,
when you put the cannon back on the frame make sure you get the link to hook on the recoil lever(hooks)or the top will move freely. I turn the barrel upside down push the link up with the curve up at the very back of the toggle and slide the top on till it is over the hooks or just past the magazine well. I then turn the gun over and slide the top back and forth a little till it connects.(it will drop down when you slide barrel forward). Finish putting the Luger back together then **** the gun to see if it will ****.
Michael
__________________
MG
"Si vis pacem, para bellum"
'If you want peace,prepare for war'
|