LugerForum Discussion Forums - View Single Post

The Wizard · 08-21-2003, 12:57 PM

I am in the process of developing an AutoCad drawing for a 120 mm long 7,62 mm barrel for the Model 1906 and P08 (short frame). I have had to merge the barrel design from the Model 1900 and P08 inorder to come up with this drawing. I have been unsuccessful in locating a drawing showing a Model 1906 American Eagle barrel. I would like to publicly thank Herr Reinhard Kornmayer without whom this project would be still dead in the water.
Interesting piece of information from barrel drawing for the Model 1900: bore diameter in mm is 7,66-7,62; groove diameter in mm is 7,91-7,87.
The Wizard

08-21-2003, 12:57 PM	#1
The Wizard User Join Date: Jun 2002 Location: Colorado Springs, Colorado Posts: 67 Thanks: 0 Thanked 0 Times in 0 Posts	7,62 mm Barrel Drawing I am in the process of developing an AutoCad drawing for a 120 mm long 7,62 mm barrel for the Model 1906 and P08 (short frame). I have had to merge the barrel design from the Model 1900 and P08 inorder to come up with this drawing. I have been unsuccessful in locating a drawing showing a Model 1906 American Eagle barrel. I would like to publicly thank Herr Reinhard Kornmayer without whom this project would be still dead in the water. Interesting piece of information from barrel drawing for the Model 1900: bore diameter in mm is 7,66-7,62; groove diameter in mm is 7,91-7,87. The Wizard __________________ The Wizard Air Dropable AND Ground Recoverable Necat omnes! Deus suos agnoscet. The application of the proper amount of high explosives can solve any problem. War is an act of force and to the application of that force there is no limit! So say the philosophers (Carl von Clausewitz b 1780 d 1831) of war.