LugerForum Discussion Forums - View Single Post

Karl · 07-01-2002, 08:23 PM

Thanks Doubs,

I have continued to search for a shop that will sleeve a Luger. Beinke & Beinke do not sleeve lugers nor does Craig Ritterhouse listed above. I was referred to Mentor Arms Company as a shop that specializes in lugers but their phone has been disconnected. If there is a reputable shop (or two) that sleeves lugers I suggest that their contact information be included in the links section of the old web site for future reference.

There must be a market for sleeving Luger barrels, especially with the inflated prices of recent years. In my experience there are lots of well-preserved lugers out there with the exception of a pitted bore. KFS

07-01-2002, 08:23 PM	#9
Karl Lifer - Twice Over Lifetime Forum Patron Join Date: Jun 2002 Location: Savannah Posts: 530 Thanks: 0 Thanked 280 Times in 123 Posts	Thanks Doubs, I have continued to search for a shop that will sleeve a Luger. Beinke & Beinke do not sleeve lugers nor does Craig Ritterhouse listed above. I was referred to Mentor Arms Company as a shop that specializes in lugers but their phone has been disconnected. If there is a reputable shop (or two) that sleeves lugers I suggest that their contact information be included in the links section of the old web site for future reference. There must be a market for sleeving Luger barrels, especially with the inflated prices of recent years. In my experience there are lots of well-preserved lugers out there with the exception of a pitted bore. KFS