LugerForum Discussion Forums - View Single Post

unspellable · 07-03-2002, 02:23 PM

We've heard talk of sleeving and boring out to the next bigger cartridge, but what about boring a barrel only a few thousandths to take a larger bullet? For example boring a 7.65 Parabellum barrel to take 0.314 bullets that were intended for 32-20 or 32 Mag? This would be using the exisiting 7.65 case. This means that in boring one would have to follow the existing rifling. Any one ever heard of this being done? It might save a pitted or worn bore. How would this compare to simply rebarreling?

unspellable

07-03-2002, 02:23 PM	#1
unspellable User Join Date: Jun 2002 Location: Iowa Posts: 768 Thanks: 0 Thanked 19 Times in 11 Posts	Question on boring out pitted bores We've heard talk of sleeving and boring out to the next bigger cartridge, but what about boring a barrel only a few thousandths to take a larger bullet? For example boring a 7.65 Parabellum barrel to take 0.314 bullets that were intended for 32-20 or 32 Mag? This would be using the exisiting 7.65 case. This means that in boring one would have to follow the existing rifling. Any one ever heard of this being done? It might save a pitted or worn bore. How would this compare to simply rebarreling? unspellable