LugerForum Discussion Forums - View Single Post

lugerholsterrepair · 12-13-2002, 08:37 PM

Guys, Tom is right about paint thinner. Mineral spirits I believe it is called. I use it for my cleaning too. You can use quite a bit flushing off the parts as it is very inexpensive, two or three dollars a gallon. Then I blow the parts off with a compressed air gun. Oil with break free on a shaving brush and wipe off when assembled. White lithium grease lightly on the rails. Jerry Burney

12-13-2002, 08:37 PM	#5
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,775 Thanks: 4,995 Thanked 3,133 Times in 1,439 Posts	Guys, Tom is right about paint thinner. Mineral spirits I believe it is called. I use it for my cleaning too. You can use quite a bit flushing off the parts as it is very inexpensive, two or three dollars a gallon. Then I blow the parts off with a compressed air gun. Oil with break free on a shaving brush and wipe off when assembled. White lithium grease lightly on the rails. Jerry Burney __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."