<img src="graemlins/jumper.gif" border="0" alt="[jumper]" /> >>>>NOTICE CORRECTED POST<<<<< <img src="graemlins/jumper.gif" border="0" alt="[jumper]" />
Tom A, John S. and Ron W., <img src="graemlins/soapbox.gif" border="0" alt="[soapbox]" />
Have you noticed that this tool Has been Forced to Failure.
Failure Mode
Total Sheer removal in one direction (CCW), and sheer displacement in the other direction (CW).
Those internal corners of the lower slot are supposed to fit closely to the Lower Stop Block on the underside of the Cannon Fork Assembly.
THIS tool is NOW totally worthless as a working tool as It will NOW place the full torque on the forward portion of the rails and distort them,
Thereby possibly destroying the fit between the fork and frame.
Its VALUE NOW is as a good model for reproducing the original or as a collector item demonstrating tool failures that damage the gun parts.
ViggoG <img src="graemlins/soapbox.gif" border="0" alt="[soapbox]" /> <img src="graemlins/wave.gif" border="0" alt="[byebye]" /> <img src="graemlins/jumper.gif" border="0" alt="[jumper]" />